Yard Force High Pressure Washer - 2800W Dual Pump HPW - Orange


Currently unavailable


Currently unavailable
The Yard Force EW U15DU Dual Pump High Pressure Washer is designed for homeowners needing a powerful and versatile cleaning solution for a variety of outdoor tasks. Its key benefit lies in the innovative TPS™ Twin Power System, offering three distinct cleaning modes for optimal efficiency and power, alongside a digital remote control gun for convenient adjustments. A potential caveat is the 8m hose length, which may require repositioning for very large areas.
| Colour | Orange |
|---|---|
| Model Part Number | EW U15DU-UK |
| Brand | Yard Force |
| Options | 2800W Dual Pump HPW |
The Yard Force EW U15DU comes with a 2-year manufacturer’s warranty. An additional year is available upon product registration.
Cleaning modes are selected directly from the digital remote control gun by pressing the corresponding buttons.
This model is designed for cold water use only. Using hot water can damage the pump and seals.
The dual pump system enables the TPS™ Twin Power System, allowing for different pressure and flow rate combinations tailored to various cleaning tasks and for energy efficiency.
Locate the water filter at the inlet connection. Carefully remove it, rinse it under running water to remove debris, and reinsert it securely.
It is recommended to use the supplied 5m power cable. If an extension cord is necessary, use a heavy-duty outdoor-rated cord of appropriate length and gauge to avoid power loss.
Yes, the machine is designed to work with detergents, typically applied via a detergent tank or suction tube, depending on the model's specific features. Always use detergents recommended for pressure washers.
Ensure the power cable is securely plugged into a working outlet and the water supply is on. Check if the reset button on the power cord has been tripped.
Verify the water supply is adequate. Clean the water filter and nozzle. Ensure all connections are tight and there are no kinks in the hose. Check that the correct mode is selected on the spray gun.
This may indicate a blockage or air in the system. Check for leaks in the hose connections. Ensure the pump is properly primed.
Check the O-rings and seals on the hose and spray gun connections. If damaged, they may need replacement. Ensure the quick-connect fittings are securely attached.
Setup:
Compatibility:
Care: