Hyco Microboil Wall Mounted Smart Technology Boiling Water Heater - 6ltr - Grey - MS6SS
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Hyco Microboil Smart 6-litre heater is an ideal solution for busy workplaces requiring instant, reliable access to boiling water for hot beverages. Its primary strength lies in its adaptive energy-saving technology, which significantly reduces electricity costs by learning your office's specific usage patterns. While this unit is highly efficient and durable, users should note that it requires professional installation to ensure the plumbing and electrical systems meet the necessary commercial standards.
All features
| Colour | Grey |
|---|---|
| Model Part Number | MS6SS |
| Brand | Hyco |
Extended Product Information
FAQs
How many cups does the 6-litre tank provide?
The 6-litre capacity provides approximately 36 cups of boiling water at once.
How much energy does the smart technology actually save?
It reduces standing heat losses by up to 50% compared to standard non-smart boiling water heaters.
Can I install this unit myself?
No, it must be installed by a qualified plumber and electrician to ensure safety and warranty compliance.
What is the warranty coverage?
The unit comes with a 1-year on-site warranty and a 2-year warranty on electronic components.
Does it need to be plumbed in?
Yes, the unit requires a direct connection to the mains water supply.
Is the tap suitable for high-volume use?
Yes, the unit is equipped with a heavy-duty tap specifically designed for high-flow, high-traffic commercial environments.
Troubleshooting
Water is not reaching boiling temperature
Check that the power supply is on and the unit has had sufficient time to complete its initial heat-up cycle; verify the smart settings have not been adjusted incorrectly.
Slow flow rate from the tap
Inspect the tap nozzle for scale buildup or debris; if the flow is consistently low, check the water supply pressure from the mains.
Unit not refilling after use
Ensure the water supply isolation valve is fully open and that there are no kinks in the inlet hose.
Pros and Cons
Pros
- 50% lower standing energy losses compared to standard heaters
- Learns user behavior to optimize power consumption
- Durable stainless steel tank for water quality
- Heavy-duty tap built for high-traffic office use
- Continuous boiling water supply even while refilling
Cons
- Requires professional installation by a qualified technician
- Limited to a 6-litre capacity which may be small for very large offices
- Wall-mounted design requires a solid supporting surface
- 1-year on-site warranty is standard but shorter than some competitors
Setup, Compatibility & Care
Installation must be performed by a qualified plumber and electrician to comply with local safety standards. Ensure the wall surface is capable of supporting the weight of the unit when fully filled with 6 litres of water. The unit connects directly to the mains water supply and a standard electrical feed. To maintain the unit, periodically check the tap assembly for mineral buildup, especially in hard water areas. While the internal smart algorithms manage heating efficiency automatically, you should ensure the unit is never completely obstructed by cabinets or shelving to allow for adequate ventilation around the outer casing. Never attempt to service the internal heating elements yourself; utilize the 1-year on-site warranty for professional assistance.