Silverhook Big Boy Body Filler - Ultra Fine Easy Sanding - 250ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Silverhook Big Boy Ultra Fine Body Filler, a two-component putty designed for filling imperfections before painting. The key benefit is its ultra-smooth finish and excellent sanding properties, making it ideal for the finishing stage. Keep in mind that proper surface preparation is crucial for optimal results.
All features
| Model Part Number | BIG11 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
How long does it take for the filler to cure?
Curing time varies depending on temperature and humidity, but generally, it takes a few hours to fully cure. Check the product instructions for specific details.
What type of sandpaper should I use?
Start with a coarser grit (e.g., 80-120) to shape the filler and then move to finer grits (e.g., 180-320) for a smooth finish.
Can I use this filler on plastic?
While it adheres to some PVCs, it is best to test on a small, inconspicuous area first. For optimal results, use a filler specifically designed for plastic.
Do I need to prime the surface after using the filler?
Yes, it is recommended to prime the surface after sanding the filler to provide a good base for the paint to adhere to.
How should I store the leftover filler?
Store the filler in a cool, dry place with the lid tightly sealed to prevent it from drying out.
What safety precautions should I take?
Wear gloves, eye protection, and a mask to avoid inhaling dust during sanding. Work in a well-ventilated area.
What can I use to apply the filler?
Use a plastic or metal spreader to apply the filler evenly to the surface. A flexible spreader can help to achieve a smooth finish.
Troubleshooting
Filler not hardening properly.
Ensure the correct mixing ratio is used and that the product has not expired. Check the storage conditions.
Filler is difficult to sand.
Make sure the filler is fully cured before sanding. Use the appropriate grit sandpaper.
Filler is cracking after application.
Ensure the surface is clean and properly prepared. Apply in thin layers to avoid cracking.
Pros and Cons
Pros
- Provides an ultra-smooth finish.
- Excellent sanding properties, preventing clogging.
- Corrosion-resistant for long-lasting results.
- Versatile and suitable for various surfaces.
- Easy to apply and work with.
Cons
- Requires mixing of two components.
- Surface preparation is essential for optimal adhesion.
- May require multiple applications for deep imperfections.
- Curing time is required before sanding and painting.
Setup, Compatibility & Care
Setup:
- Ensure you have all necessary tools: mixing tray, spreader, sandpaper, and appropriate safety gear.
- Mix the two components thoroughly, following the manufacturer's instructions for the correct ratio.
Compatibility:
- Works well on metal, wood, bridging fillers, and some PVCs.
- Compatible with a wide range of paints when applied over a properly primed surface.
Care:
- Store in a cool, dry place.
- Keep the container tightly sealed when not in use.
- Avoid contact with skin and eyes; use appropriate protective gear (gloves, eye protection).
- Dispose of the product according to local regulations.