Farrow & Ball Estate Emulsion Paint - Grey - No.274
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you effectively use Farrow & Ball Estate Emulsion Paint - No.274, ideal for those wanting to test colours before committing to a larger project. The key benefit is the ability to sample colours in your home. Keep in mind that the finish can vary slightly based on the existing wall colour and lighting conditions.
All features
| Colour | Grey |
|---|---|
| Model Part Number | No.274 |
| Brand | Farrow & Ball |
Extended Product Information
FAQs
How much area does a sample pot cover?
A 100ml sample pot covers up to 1m² on average.
What kind of finish does this paint have?
It has a chalky matt finish.
Is this paint environmentally friendly?
Yes, it is water-based and has minimal VOC content.
What surfaces can I use this paint on?
It is suitable for interior walls and ceilings, including plasterboard and primed wood.
How do I clean my brushes and rollers?
Clean them with water immediately after use.
How long does it take for the paint to dry?
Drying times vary, so check the product instructions for specifics.
Can I use this sample pot on any wall?
Make sure your wall is properly prepared. Remove any dirt or loose paint.
Troubleshooting
Uneven finish after application.
Ensure paint is stirred thoroughly. Apply an even coat and avoid over-brushing. Apply a second coat if needed.
Colour appears different than expected.
Allow the paint to fully dry and observe the colour in various lighting conditions. Consider how the underlying wall colour influences the final result. Test with a second coat if the color is off.
Pros and Cons
Pros
- Allows for on-site colour testing.
- Provides an accurate representation of the finish.
- Easy to apply.
- Environmentally friendly.
- Available in a wide range of colours.
Cons
- Coverage is limited to 1m².
- Requires proper surface preparation.
- Colour appearance can vary based on the existing wall colour and lighting.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from any loose paint or debris. Fill any holes or cracks with a suitable filler and sand smooth.
- Application: Stir the paint thoroughly before use. Apply the paint evenly using a brush or roller.
- Drying Time: Allow the paint to dry completely. This typically takes a few hours, but refer to the product instructions for specific drying times.
- Cleaning: Clean brushes and rollers with water immediately after use. If the paint has dried, use a paint stripper.
- Compatibility: Suitable for use on most interior wall and ceiling surfaces, including plasterboard, previously painted surfaces, and primed wood. Always check for compatibility with existing finishes.