Integral LED Evofire Fire Rated Downlight - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone installing or using the Integral LED Evofire Fire Rated Downlight. The key benefit is its can-less design, which improves airflow and extends the lifespan of your LED lamps. However, remember that LED GU10 lamps (max 10W) are required and not included. This guide will provide all the information you need to effectively use and maintain your downlights.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 69071 |
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamps are compatible?
Only LED GU10 lamps with a maximum of 10W are compatible with this downlight.
What is the cut-out size required?
The cut-out size should be between 70mm and 100mm.
Are the lamps included?
No, the LED GU10 lamps are not included and must be purchased separately.
What building regulations do these downlights comply with?
They comply with Building Regulations parts B, C, E, and L.
What is the depth of the downlight?
The depth of the downlight is 38mm.
Troubleshooting
Downlight doesn't turn on.
Check the GU10 lamp is correctly installed and that the power supply is connected and switched on. Try replacing the lamp with a new one to verify.
Flickering light.
Ensure the LED GU10 lamp is compatible with the downlight. Check the wiring connections for any loose connections. If the issue persists, the lamp may need replacing.
Pros and Cons
Pros
- Improved airflow for extended lamp life.
- Sleek and modern design with an ultra-thin bezel.
- Complies with building regulations, ensuring safety and compliance.
- Easy installation with screwless push-fit terminals.
Cons
- Requires separate purchase of LED GU10 lamps.
- Limited to 10W max for the GU10 lamps.
Setup, Compatibility & Care
- Installation: Ensure the power is switched off before commencing installation. Follow the manufacturer's instructions for cutting the correct sized hole (70-100mm) and wiring the downlight.
- Compatibility: Only use LED GU10 lamps with a maximum of 10W. Ensure the lamps you choose are compatible with the downlight.
- Care: Regularly dust the downlights with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, which could damage the finish or compromise safety.