MOTIP ALUMINIUM ASSEMBLY PASTE 200ML
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The MOTIP Aluminium Assembly Paste 200ml is designed for professionals and DIY enthusiasts working with machine parts and threaded joints that are exposed to high temperatures and corrosive conditions. Its key benefit is reducing friction for easier assembly and disassembly, while also providing excellent corrosion protection. A potential caveat is the need for careful application to ensure optimal performance and avoid contamination.
All features
| Model Part Number | 090312 |
|---|---|
| Brand | Motip |
Extended Product Information
FAQs
What is MOTIP Aluminium Assembly Paste used for?
It's used for easy assembly and disassembly of machine parts and threaded joints, especially those exposed to high temperatures and corrosive environments. It reduces friction and protects against corrosion.
What is the maximum temperature this paste can withstand?
The paste is temperature resistant up to +1,500 °C.
Do I need to clean the parts before applying the paste?
Yes, it is crucial to clean and degrease the surface thoroughly before application to ensure optimal adhesion and performance.
Can I mix this paste with other lubricants?
No, it is specifically stated not to mix MOTIP Aluminium Assembly Paste with other fats or greases, as this can affect its properties.
How should I apply the paste?
Apply the mounting paste sparingly as a thin film with a brush or applicator. A little goes a long way.
Is this paste suitable for outdoor use?
Yes, the paste is water-repellent, offering good protection against corrosion and environmental influences.
What are the main benefits of using this product?
The main benefits are reduced friction for easier assembly/disassembly, excellent adhesion, good corrosion protection, and high temperature resistance.
Troubleshooting
Paste feels too stiff or difficult to spread
Ensure the paste has been stored correctly. If very cold, allow it to reach room temperature. Ensure the application surface is clean and dry, as contaminants can affect spreadability.
Parts are still sticking after application
Verify that the surface was properly cleaned and degreased before application. Ensure the paste was applied evenly and in a sufficient, though not excessive, layer. Check if the application temperature is within the recommended range.
Visible residue after assembly
This can occur if too much paste was applied. For future applications, use a thinner, more sparing layer. Excess paste can sometimes be wiped away carefully after assembly, provided it does not compromise the seal or function.
Paste separates or looks oily
This might indicate improper storage or age. Ensure the product is stored as recommended. If separation is significant and persistent, consider using a fresh tube.
Pros and Cons
Pros
- Withstands extreme temperatures up to 1,500 °C.
- Provides excellent protection against corrosion.
- Significantly reduces friction for easier assembly and disassembly.
- Good adhesion ensures long-lasting protection.
- Water-repellent properties enhance durability in various conditions.
- Simple to apply for both professionals and DIY users.
Cons
- Requires careful surface preparation (cleaning and degreasing).
- Should not be mixed with other greases.
- Application needs to be done sparingly for best results.
- May leave residue if not applied correctly.
Setup, Compatibility & Care Instructions
Setup & Application:
- Read Instructions: Always refer to the specific instructions provided on the product packaging.
- Surface Preparation: Thoroughly clean and degrease the surfaces to be treated. Ensure they are dry and free from dust, dirt, or old grease.
- Application: Apply the assembly paste sparingly as a thin, uniform film using a brush or applicator. Avoid over-application, as a little goes a long way.
- Mixing: Do not mix MOTIP Aluminium Assembly Paste with any other greases or lubricants, as this can compromise its performance.
Compatibility:
This paste is designed for metal-to-metal contact on machine parts and threaded joints. It is compatible with most common metals and alloys. Ensure compatibility with specific materials if working with sensitive or specialized alloys.
Care:
Store the paste in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the lid tightly closed when not in use to prevent contamination and drying out.