Spares2Go Air Con Vent Hose For Logik Air Conditioner Duct Outlet Pipe - 5.9" X 3M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Spares2Go Air Con Vent Hose is designed for Logik air conditioning units, offering a replacement or extension for the duct outlet pipe. Its key benefit is providing a flexible, insulated solution to vent hot air effectively, reducing noise and heat output. A potential caveat is ensuring the 150mm (5.9") diameter matches your unit's requirements. The hose features a durable PVC exterior, steel wire coil for shape retention, and an aluminum foil insulation lining. The kit includes two adjustable clamp clips for secure fitting, and the hose extends up to 3 meters.
All features
| Model Part Number | 04-SHF-094 |
|---|---|
| Brand | Spares2Go |
Extended Product Information
FAQs
What is the exact diameter of this vent hose?
The hose has a diameter of 150mm, which is equivalent to 5.9 inches.
How long is the vent hose?
The hose has an operational length of 3 meters (approximately 9.8 feet).
Will this hose fit air conditioners from brands other than Logik?
While designed for Logik units, it may fit other air conditioners with a standard 150mm (5.9") vent outlet. However, compatibility is not guaranteed, and you should verify your unit's specifications.
Does the kit include everything needed for installation?
Yes, the kit includes one 3-meter insulated vent hose and two adjustable stainless steel clamp clips for securing the hose.
Can I cut the hose to a shorter length?
Yes, the hose can be cut to a shorter length if needed. Use a sharp utility knife or scissors, and ensure the cut end is clean for a good seal.
How does the insulation help?
The aluminum foil insulation lining helps to reduce the noise generated by air movement and minimizes heat transfer along the hose, improving the efficiency of your air conditioner.
What is the outer material of the hose?
The outer sleeve is made of tear-resistant PVC for durability.
Troubleshooting
Hose is not fitting securely to the unit.
Ensure you are using the correct clamp clip size and that it is tightened sufficiently around both the hose and the unit's vent outlet. Check if the hose diameter matches the unit's outlet size.
Reduced cooling efficiency or airflow.
Check the hose for any kinks, bends, or blockages. Ensure the hose is not too long or constricted. Verify that the clamp clips are creating a tight seal.
Excessive noise during operation.
Confirm that the hose is correctly installed and that the insulation lining is intact. Ensure there are no leaks at the connection points.
Hose loses its shape or collapses.
The inner steel wire coil is designed to maintain shape. If the hose collapses, check for sharp bends or damage to the internal structure. Ensure it is not being crushed.
Pros and Cons
Pros
- Effectively vents hot air from air conditioning units.
- Insulated lining reduces operational noise and heat.
- Durable construction ensures longevity and shape retention.
- Flexible design allows for versatile installation.
- Includes necessary clamp clips for a complete kit.
Cons
- Specific to Logik air conditioners; compatibility with other brands may vary.
- Requires careful measurement to ensure the 5.9" (150mm) diameter is correct for the unit.
- The 3m operational length may be insufficient for some installations without extensions.
Setup, Compatibility & Care
Setup:
- Ensure your Logik air conditioner is switched off and unplugged.
- Locate the vent outlet on the rear of your air conditioning unit.
- Attach one end of the Spares2Go vent hose to the unit's outlet. Use one of the provided clamp clips to secure it tightly, ensuring no air gaps.
- Route the hose to your desired exhaust point (e.g., window kit, wall vent).
- Attach the other end of the hose to the exhaust point, securing it with the second clamp clip.
- Ensure the hose is not kinked or excessively bent, which could impede airflow.
- Plug in and switch on your air conditioner.
Compatibility:
- This hose is specifically designed for Logik Air Conditioning Units with a standard 150mm (5.9") vent outlet.
- Always verify the diameter of your air conditioner's vent outlet before purchasing.
Care:
- Periodically inspect the hose for tears or damage.
- Clean the exterior with a damp cloth. Do not use abrasive cleaners.
- Ensure the clamp clips are not overtightened, which could damage the hose or the unit connection.
- Store the hose loosely coiled when not in use to prevent excessive creasing.