Dulux Trade Satinwood Tinted Colour Match - 2.5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Dulux Trade Satinwood is a durable, solvent-based paint designed for interior wood and metal surfaces, offering a tough, dirt-resistant satin finish. It's ideal for high-traffic areas like skirting boards and doors, often requiring no undercoat for simple colour changes. However, as this paint is mixed to order, returns or exchanges are not possible.
All features
| Model Part Number | 5183330 |
|---|---|
| Brand | Dulux Trade |
Extended Product Information
FAQs
Can this paint be used outdoors?
No, Dulux Trade Satinwood is formulated for interior use only and is not suitable for outdoor applications.
Do I need to use an undercoat?
An undercoat is generally not required unless you are making a significant colour change. For most applications, two coats of Satinwood will provide adequate coverage.
How long does it take to dry?
The paint takes approximately 4-6 hours to dry, but you should wait 16-24 hours before applying a second coat.
What surfaces can I use this paint on?
It is suitable for interior wood and metal surfaces, including MDF, doors, skirting boards, and window frames.
How do I clean my brushes after use?
Remove as much paint as possible from brushes, then clean with White Spirit or a suitable brush cleaner.
Can I return this paint if I ordered the wrong colour?
No, as this paint is mixed to order, it cannot be returned or exchanged. Please ensure your colour selection is correct before ordering.
Is this paint suitable for kitchens and bathrooms?
Yes, it is suitable for use in kitchens and bathrooms due to its durable and dirt-resistant finish.
Troubleshooting
Paint not adhering well to the surface.
Ensure the surface is clean, dry, and free from dust, grease, or old flaking paint. For difficult surfaces, consider a suitable primer.
Uneven finish or brush marks visible.
Apply paint evenly with consistent brush strokes or roller application. Avoid over-brushing or applying too thickly. Ensure paint is well-stirred.
Strong solvent smell during application.
Ensure the area is well-ventilated during and after application. Wear appropriate respiratory protection if necessary.
Paint not covering adequately.
Ensure you are applying two full coats as recommended. If making a drastic colour change, a coloured undercoat might be necessary.
White paint appearing yellow or discoloured over time.
This is a characteristic of solvent-based white paints, especially in low-light areas. For areas requiring long-lasting whiteness, consider a water-based alternative like Dulux Trade Quick Dry Satinwood.
Pros and Cons
Pros
- Provides a tough, long-lasting finish.
- Resistant to dirt and easy to clean.
- Often doesn't require an undercoat, saving time.
- Applies easily with standard tools.
- Available in a vast range of colours.
- Suitable for wood and metal surfaces.
Cons
- Cannot be returned or exchanged as it's mixed to order.
- Solvent-based paints can have strong fumes during application.
- White solvent-based paints may discolour over time, especially in low-light areas.
- Not recommended for spray application due to health and safety reasons.
- Not suitable for outdoor use.
- Requires specific tool cleaning methods (White Spirit).
Setup, Compatibility & Care
Surface Preparation:
Ensure all surfaces are sound, clean, and dry before application. New surfaces require complete dryness. For detailed preparation guidance, consult the Dulux Trade Datasheet 406.
Compatibility:
- Best Uses: MDF, Metal, Wood.
- Suitable Locations: Bathroom, Bedroom, Children's room, Dining room, Hallway, Home office, Kitchen, Living room.
- Outdoor Use: Not suitable for outdoor applications.
Application:
- Tools: Apply using a brush or roller only. Spray application is not recommended due to health and safety concerns associated with solvent-based paints.
- Coats: Apply 2 full coats for best results. An undercoat may be necessary if a significant colour change is required.
- Stirring: Stir thoroughly before use.
Drying and Recoating:
- Minimum Drying Time: 4 hours.
- Maximum Drying Time: 6 hours.
- Recoat Time (Min): 16 hours.
- Recoat Time (Max): 24 hours.
Storage:
Do not use or store in extreme temperatures, and protect from frost.
Tool Cleaning:
After use, remove excess paint from brushes and rollers before cleaning with a suitable brush cleaner or White Spirit.