Phoenix Contact M12 Sensor Connector - 5-pin push-in tech - 1424686
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Phoenix Contact 1424686 is a M12 sensor connector designed for field assembly, offering a robust and reliable solution for connecting sensors and actuators in demanding industrial environments. Its key benefit lies in the tool-free Push-in connection technology, which significantly speeds up installation and maintenance. A potential consideration is its specific A-coded configuration, which requires compatibility with other A-coded components.
All features
| Model Part Number | 1424686 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What does 'A-coded' mean for this M12 connector?
A-coded is a standard mechanical and electrical keying for M12 connectors. It ensures that only components with the same coding (A-coded) and pin configuration (5-pin in this case) can be connected, preventing incorrect pairings in systems with different types of signals or power requirements.
Can I use this connector with solid core wires?
Yes, this connector is designed to accommodate solid-core conductors with a cross-section of 0.14 to 0.75mm² using the Push-in connection technology.
What is the maximum current and voltage rating?
The connector has a rated current of 4A and a rated voltage of 60V. It is suitable for signal applications and low-power sensor/actuator connections.
How do I disconnect a wire from the Push-in terminal?
To disconnect a wire, simply activate the lever again and pull the conductor out of the terminal.
Is this connector suitable for outdoor use?
With its IP65 rating, the connector is protected against dust and low-pressure water jets. However, it is designed for industrial environments and should be used in conjunction with appropriate cabling and enclosures for full protection against prolonged outdoor exposure or harsh weather conditions.
What range of cable diameters can this connector accommodate?
The connector is designed to accommodate external cable diameters ranging from 4 mm to 8 mm.
What is the warranty period for this product?
Please refer to the manufacturer's (Phoenix Contact) official documentation or contact your supplier for specific warranty information, as it can vary by region and reseller.
Troubleshooting
Connector not powering sensor/actuator
Verify that the connector is securely mated with its counterpart. Check that the wires are correctly inserted into the Push-in terminals and that the lever is fully engaged. Ensure the correct pin assignment is used on both ends and that the upstream power supply is active and within the specified voltage range (60V).
Intermittent signal loss
Inspect the wire connections for any signs of loose strands or improper insertion into the Push-in terminals. Ensure the external cable diameter is within the specified range (4-8 mm) and that the cable is properly secured to prevent strain on the internal connections. Check the mating connector for any debris or damage.
Difficulty inserting wire
Ensure the conductor is stripped to the correct length and that no stray strands are preventing insertion. For stranded conductors, ensure they are not excessively frayed. The Push-in connection is designed for ease of use, but some resistance is normal. If significant force is required, re-check wire preparation.
Pros and Cons
Pros
- Tool-free installation reduces labor costs and time.
- Robust IP65 rating ensures durability in harsh environments.
- Reliable electrical connections for critical signal transmission.
- Designed for efficient use with sensors and actuators.
- A-coded configuration prevents miswiring.
Cons
- A-coded configuration limits compatibility to other A-coded M12 connectors.
- Not suitable for applications requiring higher current or voltage ratings than specified.
- Push-in connection might require specific wire preparation for best results with very fine strands.
Setup, Compatibility & Care
Setup: To connect a wire, simply activate the lever on the connector, insert the stripped end of the conductor into the designated Push-in socket until it is fully seated, and then release the lever. The connector is designed to accept stranded conductors with or without cable end sleeves. Ensure the conductor's stripped length is appropriate for the socket depth.
Compatibility: This connector is M12, A-coded, and has 5 positions. It is designed to mate with other M12, A-coded, 5-pin female connectors. Always verify that mating components share the same coding (A-coded) and pin count to ensure proper function and prevent damage.
Care: Keep the connector clean and dry when not in use. To clean the connector, use a soft, dry cloth. Avoid using solvents or abrasive materials. Ensure the connector is securely mated to prevent ingress of dust or moisture.