Deep Socket - Air Impact - 35mm - 1/2in Drive - Laser
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser 35mm deep impact socket is designed for professional mechanics and DIY enthusiasts working with air impact tools. Its key benefit is providing durable, corrosion-resistant performance for heavy-duty tasks while protecting your tool's anvil. A minor caveat is its specialized nature, primarily for impact use, which might not be ideal for all hand-tool applications requiring extreme precision.
All features
| Model Part Number | 1722 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What material is the socket made from?
The socket is manufactured from Chrome Vanadium steel, known for its strength and durability.
What is the purpose of the black phosphate finish?
The black phosphate finish provides corrosion resistance and helps to prevent the socket from marking the workpiece it's used on.
Can I use this socket with a standard ratchet?
Yes, it can be used with a 1/2 inch drive manual ratchet or torque wrench, though it is optimized for the demands of impact tools.
What is the drive size of this socket?
This socket has a 1/2 inch drive size.
How deep is the socket?
The socket has an internal depth of 55mm and a drive depth of 35mm.
Will this socket fit a 35mm bolt head?
Yes, the 35mm refers to the external size of the socket opening, designed to fit over a standard 35mm fastener head.
Is this socket suitable for use with impact drivers (cordless drills with impact function)?
While it can be used with a 1/2 inch drive adapter for an impact driver, it is specifically designed and recommended for the higher torque and specific impact action of air impact tools.
Troubleshooting
Socket feels loose on the drive tool anvil
Ensure the socket's drive hole is clear of debris. Verify that the anvil of your impact tool has its retaining ring or pin securely in place to hold the socket.
Difficulty fitting socket onto a fastener
Confirm you are using the correct 35mm socket size. Ensure the fastener head is not damaged or rounded, which could prevent proper engagement of the 6-point design.
Socket shows signs of wear or rust
Clean the socket thoroughly and dry it completely. Apply a light coat of oil to the surface if storing for extended periods, especially in humid environments. Consider replacement if structural integrity is compromised.
Pros and Cons
Pros
- Durable construction from Chrome Vanadium steel for longevity.
- Corrosion-resistant black phosphate finish enhances lifespan.
- Designed to protect impact tool anvils, extending tool life.
- Secure 6-point grip minimizes fastener damage.
- Deep socket design for accessing hard-to-reach fasteners.
Cons
- Primarily designed for impact tools; may be less suitable for delicate hand-tool applications.
- Specific 35mm size may not be universally needed.
- Black phosphate finish can eventually wear off with heavy abrasion.
- Not designed for use with power drills or impact drivers without a proper adapter.
Setup, Compatibility & Care
Setup: This socket requires a 1/2 inch drive impact wrench or ratchet. Simply attach the socket to the drive tool's anvil until it clicks securely into place.
Compatibility: Primarily designed for use with air impact tools. It is compatible with any 1/2 inch drive impact gun. It can also be used with a 1/2 inch drive manual ratchet or torque wrench for non-impact applications, though its impact-optimized design means it's best suited for high-torque needs.
Care: After use, clean the socket with a dry cloth to remove dirt and grease. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents that could damage the black phosphate finish. Store in a dry environment to prevent rust. Periodically inspect for signs of wear or damage.