Hahnel HL-E19 Battery - Replacement for Canon LP-E19
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Hahnel HL-E19 is a high-capacity Lithium-Ion battery designed for professional Canon DSLR cameras, offering extended shooting times. It serves as a reliable replacement for the Canon LP-E19 battery, featuring high-performance cells and built-in protection circuits. While it provides excellent longevity, users should ensure compatibility with their specific camera model before purchase.
All features
| Model Part Number | 1000 167.3 |
|---|---|
| Brand | Hahnel |
Extended Product Information
FAQs
Is the Hahnel HL-E19 a genuine Canon battery?
No, the Hahnel HL-E19 is a third-party replacement battery designed to be compatible with Canon cameras that use the LP-E19 battery.
What is the warranty on the Hahnel HL-E19 battery?
Warranty information can vary by retailer. Please check the product listing or contact the seller for specific warranty details. Hahnel typically offers a manufacturer's warranty.
Can I use the Hahnel HL-E19 battery with any Canon camera?
No, it is only compatible with specific Canon EOS digital SLR camera models that use the LP-E19 battery, such as the EOS R3 and EOS-1D X series.
How do I charge the Hahnel HL-E19 battery?
You should use a charger specifically designed for Canon LP-E19 batteries or a charger compatible with the Hahnel HL-E19. Using an incorrect charger can damage the battery or camera.
Does this battery have a memory effect?
No, as a Lithium-Ion battery, the Hahnel HL-E19 does not suffer from the memory effect, meaning you can recharge it at any time without reducing its overall capacity.
What does 'high capacity' mean for this battery?
High capacity refers to the battery's ability to store a large electrical charge, measured in mAh. The 3250 mAh rating indicates it can power your camera for longer periods between charges compared to batteries with lower mAh ratings.
Will using a third-party battery void my camera's warranty?
While using a third-party battery is generally safe, some camera manufacturers may state that using non-OEM accessories could affect the camera's warranty. It is advisable to consult your camera's warranty documentation.
Troubleshooting
Battery not recognized by camera
Ensure the battery is correctly seated in the compartment. Verify that your camera model is listed as compatible. Try cleaning the battery terminals and camera contacts. If the issue persists, try the original Canon battery to rule out a camera fault.
Camera shows low battery immediately
Allow the battery to fully charge using a compatible charger. Ensure the battery is properly seated. The battery might be faulty; try a different, known-good battery.
Battery does not hold charge
Ensure you are using the correct charger. If the battery is new, it may require an initial full charge cycle. If the problem persists after several charge cycles, the battery may be defective.
Battery overheating during charging
Immediately remove the battery from the charger and allow it to cool down in a safe place. Ensure you are using the manufacturer-recommended charger. If overheating occurs repeatedly, discontinue use and contact support.
Pros and Cons
Pros
- Extended shooting duration due to high capacity.
- Reliable performance with high-quality cells.
- Built-in safety features protect the battery and camera.
- Cost-effective alternative to OEM batteries.
- Designed as a direct replacement for the Canon LP-E19.
Cons
- Requires confirmation of camera model compatibility.
- May not be recognized by all camera firmware versions (though generally compatible).
- Initial charge time may vary.
- Third-party battery, potential warranty implications with camera manufacturer.
Setup, Compatibility & Care
Compatibility:
The Hahnel HL-E19 is specifically designed to replace the Canon LP-E19 battery. It is compatible with the following Canon camera models:
- Canon EOS R3
- Canon EOS-1D X
- Canon EOS-1D C
- Canon EOS-1D Mark III
- Canon EOS-1Ds Mark III
- Canon EOS-1D Mark IV
- Canon EOS-1D X Mark II
- Canon EOS-1D X Mark III
Always double-check your camera's manual or manufacturer's website to confirm battery compatibility if your model is not listed.
Setup:
- Ensure your camera is powered off.
- Open the battery compartment door on your camera.
- Remove the old battery if present.
- Align the Hahnel HL-E19 battery with the contacts in the compartment and slide it in until it clicks securely into place.
- Close the battery compartment door.
- Power on your camera. The battery level indicator should display the charge status.
Care:
- Charging: Use only a compatible charger designed for LP-E19 or HL-E19 batteries. Avoid overcharging.
- Storage: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the battery to around 50% capacity.
- Cleaning: Keep the battery terminals clean. If dirty, gently wipe them with a dry, soft cloth. Never use liquids or abrasive cleaners.
- Avoid Disassembly: Do not attempt to open or disassemble the battery, as this can be dangerous and will void the warranty.