PlastiKote Quick Dry Satinwood Spray Paint - White - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to update or refresh trim areas made from wood, metal, stone, or plastic using PlastiKote Quick Dry Satinwood Spray Paint. The primary benefit is a fast-drying, scratch-resistant finish with low odor, making it ideal for both professionals and DIY enthusiasts. Keep in mind that achieving the best results requires proper surface preparation.
All features
| Colour | White |
|---|---|
| Model Part Number | 071006 |
| Brand | PlastiKote |
Extended Product Information
FAQs
How long does it take to dry?
The paint is touch dry in approximately 45 minutes.
What surfaces can I use it on?
It is suitable for wood, metal, stone, and most types of plastic.
How much area does one can cover?
One 400ml aerosol can provide a coverage of 1-1.75m2.
Is it scratch-resistant?
Yes, the paint provides a long-lasting, scratch-resistant finish.
Does it have a strong odor?
No, it features a low odor formulation for a more pleasant experience.
How do I prepare the surface before painting?
Clean the surface thoroughly, removing any dirt or loose paint. Lightly sand the surface to improve adhesion and ensure it is completely dry.
Can I use it on outdoor furniture?
Yes, it can be used on outdoor furniture, provided the surface is properly prepared.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure you're holding the can the correct distance from the surface. Allow sufficient drying time between coats.
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand the surface to improve adhesion. Consider a primer for challenging surfaces.
Color is uneven.
Shake the can thoroughly before and during use. Apply multiple thin coats rather than one thick coat to achieve an even finish.
Pros and Cons
Pros
- Fast drying time saves time and allows for quick project completion.
- The scratch-resistant finish ensures long-lasting durability.
- Low odor makes it more pleasant to use, especially in enclosed spaces.
- Versatile application across multiple surfaces.
- Easy application via aerosol spray for consistent results.
Cons
- Requires proper surface preparation for optimal adhesion and finish.
- Coverage may vary depending on the surface and application technique.
- Multiple coats may be needed for full coverage.
- May require masking of surrounding areas to prevent overspray.
Setup, Compatibility & Care
- Preparation:
- Clean the surface thoroughly, removing any dirt, grease, or loose paint.
- Sand the surface lightly to improve adhesion.
- Ensure the surface is completely dry before painting.
- Application:
- Shake the can well for at least one minute before use.
- Hold the can approximately 10-12 inches from the surface.
- Apply thin, even coats, avoiding drips or runs.
- Allow each coat to dry for the recommended time before applying additional coats.
- Compatibility:
- Suitable for wood, metal, stone, and most types of plastic.
- Always test on a small, inconspicuous area to ensure compatibility.
- Care:
- Clean any overspray immediately with the appropriate solvent.
- Once dry, the finish is scratch-resistant and can be cleaned with a damp cloth.
- Avoid using abrasive cleaners.