Husqvarna Pressure Washer - PW 240

The Husqvarna PW 240 is designed for cold water use only. Using hot water can damage the pump and void the warranty.

The PW 240 comes with a multifunctional nozzle. Twist the nozzle head to adjust the spray pattern as indicated by markings, or swap to a different included nozzle if applicable for specialized tasks.

Yes, the PW 240 is designed to work with detergents. Use the low-pressure setting and the appropriate detergent applicator or nozzle to apply cleaning solutions.

The specific length of the high-pressure hose is typically detailed in the product's full specifications, but the PW 240 is designed with flexibility in mind.

To prevent freezing damage, drain all water from the pump and hoses. Store the unit in a frost-free location. Consider using a pump protector fluid if storing in an area prone to freezing.

Basic assembly is typically required, such as connecting the handle, attaching the hose reel, and connecting the high-pressure hose and water supply.

Ensure the power cord is securely plugged into a working GFCI outlet. Check if the water supply is turned on.

Verify the water source is fully open. Check the water filter for blockages and clean if necessary. Ensure the high-pressure hose and nozzle are not clogged.

Check for power interruptions. The unit may have overheated; allow it to cool down before restarting. Ensure the water supply is constant.

Ensure all hose connections are tight and properly seated. Check O-rings for damage and replace if needed.