Nite Ize Steelie Freemount Dash Mount Kit - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Nite Ize Steelie Freemount Dash Mount Kit is designed for drivers who need a secure and adjustable phone mount for their vehicle. Its key benefit is the powerful magnetic hold combined with a quick-release mechanism for easy one-handed operation, offering a wide range of viewing angles. A potential caveat is that the adhesive may not be suitable for all dashboard surfaces.
All features
| Colour | Black |
|---|---|
| Model Part Number | STFD-01-R8 |
| Brand | Nite Ize |
Extended Product Information
FAQs
Will this mount work with my specific phone model?
The Steelie Freemount is designed to hold phones between 2.24" and 3.54" wide. If your phone falls within this range, it should fit. The magnetic attachment works with the included steel plate which attaches to your phone or case.
How strong is the magnet?
The mount uses a powerful neodymium magnet, which is strong enough to securely hold most smartphones, even when driving over uneven surfaces.
Can I use this mount with a popsocket or other grip on my phone?
The magnetic connection requires a clear path to the steel plate. If you have a popsocket or similar accessory attached to where the steel plate needs to go, it may not work effectively. You may need to attach the plate to a different part of your case or phone.
Will the adhesive damage my dashboard?
The kit includes 3M VHB foam adhesive tape, which is designed to be removable without damaging most dashboard surfaces. However, it is always recommended to test in an inconspicuous area first, especially on sensitive materials.
How do I clean the magnetic mount?
You can clean the magnetic mount with a slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and the magnet.
Can I transfer the mount to another car?
Yes, you can transfer the mount. You will need to carefully remove it from the original surface and then reapply the adhesive. For best results, it is recommended to use a new 3M VHB adhesive pad if the original has lost its tackiness.
Does the magnet affect my phone's battery or other components?
The neodymium magnet is shielded and designed for phone mounting. It should not negatively impact your phone's battery, compass, or other electronic components when used as intended.
Troubleshooting
Phone keeps falling off the mount.
Ensure the steel plate is properly attached to a clean, flat surface on your phone or case. Verify that the phone's width is within the 2.24"-3.54" range and that the magnetic connection is clean.
The mount won't stay attached to the dashboard.
Ensure the dashboard surface was thoroughly cleaned and dried before application. Allow the 3M VHB adhesive to cure for at least 24 hours. If the surface is textured or porous, the adhesive may not bond effectively.
Difficulty removing the phone with one hand.
Ensure you are using the quick-release button as intended. Practice the motion a few times to get accustomed to the pressure needed.
Adhesive left residue upon removal.
While designed to be damage-free, some residue can occur. Use a gentle adhesive remover or isopropyl alcohol on a soft cloth to carefully clean the surface.
Pros and Cons
Pros
- Securely holds phones using strong magnets.
- Offers highly adjustable viewing angles for optimal use.
- Easy one-handed attachment and detachment of the phone.
- Adhesive is designed to be removable without surface damage.
- Universal design fits a wide range of phone sizes.
Cons
- Adhesive strength may vary on different dashboard textures.
- Requires a metal plate or direct magnet contact on the phone/case.
- Can be relatively large once attached to the dashboard.
- The magnet might interfere with specific phone features if placed incorrectly.
- Not ideal for extremely rough terrain where significant vibration occurs.
Setup, Compatibility & Care
Setup:
- Clean the dashboard surface where you intend to mount the ball.
- Peel the backing from the 3M VHB adhesive tape on the dash mount base.
- Firmly press the mount onto the cleaned surface and hold for at least 30 seconds.
- Allow the adhesive to cure for at least 24 hours for maximum bond strength.
- Attach the steel plate to the back of your phone or phone case (ensure the surface is clean and dry).
- Place your phone onto the dash ball; the magnet will securely attach.
Compatibility:
- Phone Size: Compatible with phones measuring between 2.24" and 3.54" (57mm - 90mm) in width.
- Phone Cases: Works with most phone cases, but a direct attachment of the steel plate to a smooth, flat surface on the case or phone is recommended for best performance.
- Surfaces: Best suited for smooth, non-porous dashboard surfaces. Test the adhesive in an inconspicuous area if unsure.
Care:
- To clean the magnetic mount, use a slightly damp cloth. Avoid harsh chemicals.
- If you need to reposition the mount, carefully peel it off and reapply the included adhesive (or purchase a new 3M VHB pad if the original loses adhesion).
- Ensure the steel plate on your phone/case remains clean to maintain magnetic strength.