Unibond No More Nails Waterproof Cartridge - White

UniBond No More Nails Waterproof will eliminate the need for nails and screws inside and outside t...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for DIY enthusiasts and homeowners seeking a strong, waterproof adhesive for various projects. UniBond No More Nails Waterproof eliminates the need for nails and screws, offering a convenient and reliable bonding solution. However, it's crucial to allow sufficient drying time for optimal results. This cartridge adhesive is designed for interior and exterior use, suitable for a wide range of materials, and utilizes hybrid polymer technology for a durable, water-resistant finish.

All features

ColourWhite
Model Part Number360652
BrandUnibond

Extended Product Information

FAQs

Can I use this product on painted surfaces?

Yes, but ensure the paint is fully cured and the surface is prepared properly for optimal adhesion.

How long does it take for the adhesive to fully cure?

The adhesive typically takes 24-48 hours to fully cure, depending on the environment and the weight of the items being bonded.

What is the shelf life of an unopened cartridge?

The shelf life of an unopened cartridge is typically 12-18 months. Store in a cool, dry place.

Can I use this adhesive in extreme temperatures?

While it is waterproof, extreme temperatures may affect the bonding strength. Consult the product information for specific temperature ranges.

Is UniBond No More Nails Waterproof suitable for use on polystyrene?

Generally, it is not recommended for use on polystyrene. Check the product label for specific material compatibility information.

How do I remove the adhesive if I make a mistake?

Use white spirit to remove uncured adhesive. Once cured, removal can be more difficult; mechanical removal may be required.

Can this adhesive be painted over?

Yes, once fully cured, the adhesive can be painted. Allow the adhesive to dry completely before painting.

Troubleshooting

Adhesive isn't sticking

Ensure surfaces are clean and free of contaminants. Make sure you are using enough adhesive and that the items are pressed firmly together. Allow for adequate drying time.

Cartridge is difficult to dispense

Check the cartridge gun and make sure it's functioning correctly. Sometimes the tip may be clogged; trim the nozzle again.

Adhesive is visible after bonding

Apply the adhesive carefully, and wipe away any excess with white spirit before it dries. Using masking tape around the area can help to keep the area clean.

Pros and Cons

Pros

  • Eliminates the need for nails and screws, simplifying projects.
  • Suitable for both interior and exterior applications, increasing versatility.
  • Bonds to a wide range of materials, making it adaptable for various DIY tasks.
  • Waterproof formula ensures long-lasting bonds in wet conditions.
  • Cartridge design enables easy and controlled application.

Cons

  • Requires a cartridge gun for application.
  • Drying time of 24-48 hours may be needed for full bond strength.
  • Very heavy items may need additional support during the drying period.
  • Excess adhesive needs to be cleaned up with white spirit.
  • Not suitable for all types of plastics.

Setup, Compatibility & Care

  1. Preparation: Ensure surfaces are clean, free from dust, oil, grease, and polish.
  2. Application: Cut off the tip of the cartridge above the screw thread, screw on the nozzle, and cut to the desired size. Insert the cartridge into a cartridge gun.
  3. Bonding: Apply the adhesive to one surface, firmly press the items together with a twisting action.
  4. Cleanup: Wipe away excess adhesive with white spirit.
  5. Drying: Allow 24-48 hours for the adhesive to fully dry. Support may be needed for heavy items.

Compatibility: UniBond No More Nails Waterproof is compatible with wood, ceramic, metal, concrete, brick, plaster, stone, and most plastics.

Care: Store the cartridge in a cool, dry place. Always replace the cap on the nozzle after use to prevent the adhesive from drying out. Clean up spills immediately with white spirit.