Schneider Electric Comb Rail - A9XPH224
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Schneider Electric A9XPH224 is a 2-phase comb busbar designed for industrial automation and electrical distribution systems. It is ideal for linking live and neutral terminals of up to 12 devices with a 18mm pitch, ensuring safe spacing and preventing short circuits. A key benefit is its fire resistance up to +960°C for 30 seconds, making it suitable for hazardous environments. However, it is specifically designed for the Schneider Electric iC60 series and compatible components, limiting its use with other brands.
All features
| Model Part Number | A9XPH224 |
|---|---|
| Brand | Schneider Electric |
Extended Product Information
FAQs
What is the primary function of the A9XPH224 busbar?
The A9XPH224 busbar is used to efficiently link the live and neutral terminals of multiple compatible Schneider Electric devices in a 2-phase electrical system, facilitating organized power distribution.
What types of devices is this busbar compatible with?
It is compatible with Schneider Electric's iC60, iK60, iID, iID K, and iSW series devices.
What is the maximum number of modules this busbar can accommodate?
The busbar has a capacity of 24 modules, allowing it to connect up to 12 devices in a 2-phase configuration.
What is the current rating of the A9XPH224?
The busbar has a current rating of 100A.
Does the busbar offer any safety features?
Yes, it features a 18mm connector pitch for safe spacing and is fire-resistant up to +960°C for 30 seconds.
Can this busbar be used in single-phase systems?
No, this busbar is specifically designed for 2-phase (1L+N) electrical systems.
What are the environmental benefits of this product?
This product is 'Better World Product' verified and meets Schneider Electric's 'Green Premium' environmental standards.
Troubleshooting
No power to connected devices
Verify that the main power supply is on and correctly connected to the busbar's input. Check that all individual device connections to the busbar are secure.
Intermittent connections or flickering
Inspect the connections between the busbar and the devices for any signs of looseness or corrosion. Tighten connections as needed. Ensure the busbar is properly seated.
Overheating of the busbar
Ensure the total current draw from connected devices does not exceed the 100A rating. Check for proper ventilation around the busbar and connected components. Verify correct installation pitch.
Pros and Cons
Pros
- Enhanced safety due to fire resistance and wide connector pitch.
- Reliable performance in industrial automation applications.
- Supports up to 12 devices for efficient power distribution.
- Environmentally conscious product verified by Schneider Electric.
Cons
- Limited compatibility, primarily designed for Schneider Electric iC60 series.
- Requires specific knowledge of 2-phase electrical systems for installation.
- Not suitable for single-phase applications or non-Schneider Electric components.
Setup, Compatibility & Care
Setup: Ensure the power supply is completely de-energized before installation. Mount the busbar securely within the electrical enclosure. Connect the busbar to the live and neutral terminals of the compatible Schneider Electric devices according to the installation manual. Verify all connections are tight and secure.
Compatibility: This busbar is designed for use with Schneider Electric iC60, iK60, iID, iID K, and iSW series devices. It is specifically for 2-phase (1L+N) systems and rated for 415V AC and a maximum current of 100A.
Care: Regular inspection for dust accumulation or physical damage is recommended. Clean with a dry or slightly damp cloth only when the power is confirmed off. Avoid using solvents or abrasive cleaners. Ensure connections remain clean and free from corrosion.