Araldite Crystal Clear Epoxy Adhesive 2 x 15ml Tubes (2 Packs) - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts, crafters, and anyone needing durable, clear repairs. The Araldite Crystal Clear Epoxy Adhesive offers a strong, long-lasting bond with an invisible finish, perfect for visible repairs. A potential caveat is that it requires precise mixing of two components, which may take practice for beginners.
All features
| Colour | White |
|---|---|
| Brand | Araldite |
Extended Product Information
FAQs
What is the shelf life of Araldite Crystal Clear Epoxy?
Unopened tubes, stored correctly in a cool, dry place, typically have a shelf life of 2-3 years. Once mixed, the working life is very short, and it cannot be stored.
How long does it take to fully cure?
Araldite Crystal Clear Epoxy typically achieves handling strength in about 1 hour and full cure in 12-24 hours. This can vary depending on temperature and humidity.
Can I use this on flexible plastics?
This epoxy creates a rigid bond and is not recommended for flexible plastics like polyethylene or polypropylene. For flexible materials, a different type of adhesive might be more suitable.
What is the working time after mixing?
The working time, or pot life, after mixing the resin and hardener is typically around 5 minutes. It's important to mix only what you can use within this time frame.
How do I clean up uncured adhesive?
Uncured adhesive can usually be wiped away with a damp cloth or cleaned with an appropriate solvent, such as methylated spirits or acetone, depending on the surface. Always test the solvent on an inconspicuous area first.
Is this adhesive waterproof once cured?
Yes, once fully cured, Araldite Crystal Clear Epoxy Adhesive is generally waterproof and resistant to many common chemicals, making it suitable for various applications.
What is the total volume of adhesive provided?
Each pack contains two 15ml tubes (resin and hardener), totaling 30ml per pack. Since this is a 2-pack offer, you receive a total of 60ml of adhesive (4 tubes).
Troubleshooting
Adhesive does not cure or cures slowly.
Ensure equal parts of resin and hardener were used and mixed thoroughly for the correct duration. Check that the components were not past their expiry date and were stored correctly. Temperature and humidity can affect cure times; ensure working conditions are within the recommended range.
Bond is weak or fails.
Verify that surfaces were properly prepared (clean, dry, and possibly abraded). Ensure sufficient adhesive was applied and surfaces were held together correctly during the handling time. Check for compatibility issues with the materials being bonded.
Difficulty in mixing the two parts.
Ensure no excess material is left in the tubes and that both resin and hardener are dispensed evenly. Use a flat, clean surface for mixing and a suitable tool.
Adhesive is cloudy after curing.
This can occur if the two parts were not mixed thoroughly or if moisture was present during application or curing. Ensure a uniform mix and a dry environment for optimal clarity.
Pros and Cons
Pros
- Provides a strong and durable bond.
- Dries to a crystal-clear finish, ideal for aesthetic repairs.
- Suitable for a wide variety of materials.
- Solvent-free formula offers safer application with less odor.
- Comes in a value pack with extra supply.
Cons
- Requires precise mixing of resin and hardener.
- Curing time may vary depending on environmental conditions.
- Not suitable for flexible materials where a rigid bond is not desired.
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or oil. Lightly abrading smooth surfaces can improve adhesion.
- Dispense equal amounts of resin and hardener onto a clean, disposable surface (e.g., a piece of cardboard or plastic).
- Mix the two components thoroughly with a spatula or mixing stick for the specified time (usually 1-2 minutes) until a uniform color and consistency is achieved.
- Apply the mixed adhesive to one surface immediately.
- Join the surfaces and hold them firmly in place for the recommended handling time.
Compatibility:
This adhesive is compatible with glass, ceramics, metal, wood, concrete, leather, rubber, and many plastics (excluding polyethylene, PTFE, and nylon). Always test on an inconspicuous area of plastics if unsure.
Care:
Store unused tubes tightly capped in a cool, dry place away from direct sunlight. Clean up any uncured adhesive residue with a damp cloth or appropriate solvent (refer to product packaging for specific recommendations). Once cured, the adhesive is generally resistant to water and many common chemicals.