Carlube Ep2 Lithium Grease Lubricant Extreme Performance Cartridge 500G x2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Carlube Lithium EP2 Grease is designed for automotive and industrial ball and roller bearing applications requiring a high melting point, smooth, multi-purpose grease. Its key benefit is providing excellent extreme pressure (EP) performance and protection against shock loading and high pressures or temperatures, while a potential caveat is its specific temperature range limitations (-15 C to 120 C). Key features include high resistance to oxidation and water washout, good EP performance, prevention of disc brake squeal, and suitability for NLGI 2 Lithium Grease applications.
All features
| Model Part Number | XGE400 |
|---|---|
| Brand | Carlube |
Extended Product Information
FAQs
What does 'EP2' stand for in Carlube Lithium EP2 Grease?
'EP' stands for Extreme Pressure, indicating the grease contains additives to protect components under high load conditions. '2' refers to its NLGI (National Lubricating Grease Institute) consistency grade, which is a medium-thick grease.
Can this grease be used for all types of bearings?
It is specifically recommended for automotive and industrial ball, roller, or plain bearings, especially those experiencing high loads, shock loading, or high pressures. It's most suitable where an NLGI 2 Lithium Grease is specified.
What is the operating temperature range for this grease?
The operating temperature range for Carlube Lithium EP2 Grease is from -15°C to 120°C.
How often should I re-lubricate components with this grease?
The re-lubrication interval depends on the application, operating conditions (load, speed, temperature, environment), and component type. Consult the equipment manufacturer's recommendations or a lubrication guide for specific intervals.
Is this grease suitable for high-speed applications?
While it offers excellent EP properties, its suitability for very high-speed applications depends on the specific bearing type and operating conditions. For high-speed bearings, greases with lower base oil viscosity might be preferred. Always consult the bearing manufacturer's recommendations.
Can I use this grease in a standard manual grease gun?
Yes, this 500g cartridge is designed to fit standard manual grease guns that accept 500g cartridges.
What is the benefit of its resistance to water washout?
Resistance to water washout means the grease is less likely to be displaced or emulsified by water, ensuring it remains in place to provide continuous lubrication even in wet or wash-down environments.
Troubleshooting
Grease gun not dispensing product
Ensure the cartridge is correctly seated in the gun, the follower rod is fully retracted, and any air has been purged. Check for blockages in the gun or nozzle.
Product appears stiff or difficult to apply in cold weather
While rated for -15°C, extremely low temperatures can increase viscosity. Allow the grease and equipment to warm slightly if possible. Ensure the grease gun is functioning correctly at lower temperatures.
Disc brake squeal persists after application
Ensure the grease was applied to the correct areas (e.g., back of brake pads, caliper pins) and not the friction surfaces. Re-apply if necessary, ensuring thorough cleaning first. Consult a professional if the issue continues.
Premature lubricant breakdown or wear observed
Verify that the operating temperature and load conditions do not exceed the grease's capabilities. Ensure the correct amount of grease was applied and that no contamination has occurred.
Pros and Cons
Pros
- Excellent extreme pressure performance for heavy-duty applications.
- High resistance to water washout and oxidation for durability.
- Helps prevent common issues like disc brake squeal.
- Suitable for a broad range of automotive and industrial bearing types.
- Trusted brand with a commitment to quality lubricants.
Cons
- Temperature range is limited to -15°C to 120°C, not suitable for extreme high-temperature operations.
- May require specific application tools for cartridge use.
- EP additives might not be necessary or beneficial for all low-load applications.
Setup, Compatibility & Care
Setup:
This product is typically supplied in a 500g cartridge designed for use with standard grease guns. Ensure your grease gun is compatible with standard 500g cartridges. Clean the application point thoroughly before applying grease to remove old grease, dirt, and debris. Insert the cartridge into the grease gun and purge any air before use.
Compatibility:
Carlube Lithium EP2 Grease is generally compatible with other lithium-based greases of similar NLGI consistency. However, when switching from a different type of grease, it is best practice to clean out the old grease thoroughly to avoid potential incompatibilities. It is recommended for applications requiring an NLGI 2 Lithium Grease.
Care:
Store the grease cartridges in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the cartridge sealed when not in use to prevent contamination. Regularly inspect lubricated components for signs of wear or lubricant degradation. Clean any excess grease from around the application point with a clean cloth.