Rubio Monocoat Wood Oil Finish - Fern
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking an efficient, durable wood protection and coloring solution. The key benefit is achieving a long-lasting, wear, water, and heat-resistant finish with a single coat, ideal for high-traffic areas and quick renovations. A caveat to note is that color results can vary based on wood type, making sample testing essential. Rubio Monocoat Oil Plus 2C combines a protective oil (A-part) and an accelerator (B-part) to enhance natural wood beauty with 40 available colors, offering a sustainable, user-friendly application for various interior wood surfaces.
All features
| Colour | Green |
|---|---|
| Model Part Number | 2CFERN/350ML |
| Brand | Rubio Monocoat |
Extended Product Information
FAQs
How much Rubio Monocoat Oil Plus 2C do I need for my project?
A little goes a long way. Typically, one liter covers approximately 20-30 square meters (215-320 sq ft) for the first coat, depending on the wood type and application method. Always check the product packaging for specific coverage rates.
Can I apply Rubio Monocoat Oil Plus 2C over a pre-finished surface?
No, Rubio Monocoat Oil Plus 2C must be applied to bare, unfinished wood. If the wood is already finished, it needs to be completely stripped back to its natural state.
How long does the mixed product last?
Once mixed, the A and B parts have a limited working time, typically 4-6 hours, depending on the temperature. It is best to mix only what you can use within that timeframe.
What is the difference between Oil Plus 2C and other Rubio Monocoat products?
Oil Plus 2C is a colored hardwax oil that provides both protection and color in a single layer. Other Rubio Monocoat products might be clear protectors, pre-colors, or maintenance oils, each serving different purposes.
Can I re-coat or repair areas later?
Yes, repairs and recoating are simple. You can spot-repair small areas or re-coat an entire surface without sanding, provided the original finish was Rubio Monocoat Oil Plus 2C.
Is this product suitable for cutting boards or kitchen countertops?
Yes, Rubio Monocoat Oil Plus 2C is compliant with food contact regulations and is resistant to water and heat, making it suitable for these applications. Ensure proper curing before prolonged food contact.
How long does it take for the finish to fully cure?
The surface is walkable within 24-48 hours, but a full cure typically takes 7 days. Avoid heavy use, moisture, and cleaning during the full curing period.
Troubleshooting
Uneven color or finish
Ensure consistent mixing of A and B parts. Apply the product evenly and work in manageable sections. Remove excess product thoroughly after application.
Product dries too quickly
Check the ambient temperature and humidity, as these can affect drying time. Avoid mixing larger batches than can be applied within the recommended working time.
Surface feels sticky or tacky after drying
This usually indicates excess product was not removed properly. Buff the affected area with a clean cloth or a buffing machine to remove the residue.
Difficulty in removing excess oil
Ensure you are using a clean, lint-free cloth or pad for removal. Work systematically and replace cloths as they become saturated with oil.
Poor adhesion or durability
Verify the wood surface was properly prepared (clean, dry, free of contaminants). Ensure the A and B parts were mixed in the correct ratio and that the product was fully cured before use.
Pros and Cons
Pros
- Extremely durable finish with excellent resistance to wear, water, and heat.
- Single-coat application saves significant time and labor.
- Enhances the natural aesthetic of the wood.
- Environmentally conscious with low usage requirements.
- Safe for use in homes with children and pets.
- Wide range of color options available.
Cons
- Color results can vary depending on the wood species, necessitating sample testing.
- Requires specific application techniques to avoid issues like uneven coverage.
- Accelerator component requires proper mixing for optimal performance.
- Not suitable for exterior applications.
- Can be more expensive upfront compared to some conventional finishes.
Setup, Compatibility & Care
Setup:
- Ensure the wood surface is clean, dry, and free of dust, grease, and old finishes.
- In a separate container, mix the oil (A-part) and the accelerator (B-part) according to the product's ratio. Do not mix more than can be applied within the working time.
- Apply the mixture evenly to the wood using a Rubio Monocoat application tool (e.g., sponge, applicator pad, or brush).
- Work in sections, ensuring consistent coverage.
- After application, remove any excess oil with a cloth or buffer pad within the recommended time frame.
Compatibility:
- Suitable for all types of interior wood.
- Ideal for floors, furniture, doors, stairs, tabletops, and more.
- Can be applied over existing Rubio Monocoat finishes for repairs or color changes.
- Not recommended for exterior use.
Care:
- Clean spills immediately with a damp cloth.
- For regular cleaning, use a well-wrung-out mop or cloth. Avoid excessive water.
- Use Rubio Monocoat's dedicated cleaning and maintenance products for best results and to preserve the finish.
- Avoid harsh chemical cleaners or abrasive pads.