Loctite Glue Glass Bond 3g (3 Pack) - Loctite

Not Available Loctite Glue Glass Bond 3g (3 Pack) - Loctite

The Loctite Glue Glass Bond 3g (3 Pack) is a specialist adhesive designed for crystal-clear, insta...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Loctite Glue Glass Bond 3g (3 Pack) is for DIY enthusiasts and homeowners needing to repair delicate glass items. Its key benefit is providing crystal-clear, instant, and durable bonds for glass-to-glass and glass-to-metal applications, ensuring invisible repairs. A potential caveat is its specialized nature, meaning it's less suitable for plastics like polyethylene or polypropylene.

All features

Brand	Loctite

Extended Product Information

FAQs

How long does it take for the glue to fully cure?

The initial bond sets in about 60 seconds, but a full cure, providing maximum strength and resistance, takes approximately 24 hours.

Can I use this on plastic items?

No, this adhesive is specifically formulated for glass, crystal, metal, and ceramic. It is not suitable for most plastics, especially polyethylene (PE) and polypropylene (PP).

Is the repaired item safe to put in the dishwasher?

Yes, once fully cured (24 hours), the bond is water and dishwasher resistant, making it safe for regular cleaning.

What is the shelf life of the Loctite Glass Bond?

With the anti-clog cap properly sealed, the adhesive can maintain its effectiveness for at least one year when stored in a cool, dry place.

How much adhesive should I apply?

Apply a thin, even layer to one surface. Too much adhesive can squeeze out and create a visible bond line or make positioning difficult.

Can this glue repair cracked glass that has missing pieces?

It is best for bonding clean breaks where pieces fit together perfectly. It is not designed as a filler for significant gaps or missing sections of glass.

Troubleshooting

Glue does not bond surfaces quickly

Ensure surfaces are clean and dry. Humidity levels may affect cure time; try a slightly more humid environment if possible. Check that the glue is not expired.

Visible white residue after bonding

This can occur if too much adhesive was used or if solvent-based cleaners were used after bonding. Apply a small amount and ensure thorough cleaning of excess before it cures. For minor residue on the surface, try gently scraping with a razor blade once fully cured.

Tube nozzle is clogged

Use the anti-clog cap to clear the nozzle. If severely clogged, carefully try to clear with a fine pin or needle. Store upright with the cap firmly on.

Bond fails after exposure to water or heat

While resistant, extreme or prolonged exposure beyond normal dishwasher cycles or temperatures may degrade the bond over time. Ensure full cure before exposing to such conditions.

Pros and Cons

Pros

Bonds glass quickly and invisibly.
Water and dishwasher resistant for durable repairs.
Resistant to shock and temperature changes.
Anti-clog cap ensures longevity and ease of use.
Value pack for multiple repair needs.

Cons

Not suitable for all plastics (e.g., PE, PP).
Requires precise application for best results.
Small tube size (3g) may be depleted quickly for large repairs.

Setup, Compatibility & Care

Setup:

Ensure both glass surfaces are clean, dry, and free from dust or grease. Isopropyl alcohol can be used for cleaning.
Carefully open the tube using the anti-clog cap.
Apply a small amount of adhesive to one surface. Avoid applying too much, as this can hinder the bond or seep out.
Immediately press the two surfaces together firmly and hold for approximately 60 seconds until the initial bond sets.
Allow 24 hours for the full cure before exposing the repaired item to stress, water, or dishwashers.

Compatibility:

This adhesive is designed for glass, crystal, tinted glass, metal, and ceramic. It is not suitable for use on plastics such as Polyethylene (PE) or Polypropylene (PP), nor is it recommended for Styrofoam or rubber.

Care:

Store tubes in a cool, dry place, away from direct sunlight.
Ensure the anti-clog cap is securely in place after each use to prevent drying.
Clean any excess uncured adhesive immediately with a damp cloth. Cured adhesive may be difficult to remove.