DecoArt Multi Surface Satin Acrylic Paint - DA802-30

No, this paint is self-sealing and does not require a separate primer. It adheres well to most surfaces directly.

The paint is dry to the touch in about 1 hour, but it requires approximately 72 hours (3 days) to fully cure for maximum durability and resistance to cleaning chemicals.

Yes, this paint can be used on fabric. For best results and flexibility, consider mixing it with a fabric medium according to the medium's instructions.

Yes, once fully cured, the paint provides a durable finish that is resistant to cleaning chemicals and suitable for many outdoor applications like planters or decorative garden items.

Clean brushes and tools immediately with soap and water while the paint is still wet. Dried paint can be difficult to remove.

Yes, the paint is water-based and non-toxic.

Yes, all DecoArt Multi-Surface colors are intermixable, allowing you to create custom shades.

This can happen if the lid was not sealed properly. Try adding a tiny amount of water (1-2 drops per tablespoon of paint) and mix thoroughly. Avoid adding too much water, as this can compromise adhesion and durability.

Ensure the plastic surface is clean and free of any mold release agents. Lightly scuffing the surface with fine-grit sandpaper (e.g., 220 grit) before painting can improve adhesion. Allow adequate cure time.

Apply paint in thin, even coats. Use a high-quality brush and allow the paint to level itself. For larger areas, consider using a foam roller. If necessary, light sanding between coats (once dry) can help achieve a smoother finish.

The paint is designed for excellent coverage, but some colors, especially lighter or brighter shades over dark surfaces, may require a second coat for full opacity. Ensure the first coat is dry before applying the second.