Devcon Plastic Welder - Cream - 22045
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to repair hard plastics and other materials using Devcon Plastic Welder. The key benefit is its ability to create strong, waterproof bonds with minimal preparation. Keep in mind that full curing takes 24 hours.
All features
| Colour | Cream |
|---|---|
| Model Part Number | 22045 |
| Brand | Devcon |
Extended Product Information
FAQs
What materials can I bond with Devcon Plastic Welder?
It can bond hard plastic, styrene, PVC, acrylic, ceramic, concrete, fiberglass, metal, vinyl, and wood.
How long does it take to cure?
Handling time is 4-5 minutes, sets in 10-15 minutes, and full cure takes 24 hours.
Can I paint over the bonded area?
Yes, after the product is fully cured, it can be sanded and painted.
Is it waterproof?
Yes, it creates a waterproof bond.
What is the tensile strength?
The tensile strength is 3500psi.
What is the package size?
The package contains 25ml (0.84 fl oz) of the product.
Troubleshooting
Bond is not strong.
Ensure surfaces were properly cleaned and prepared. Allow for the full 24-hour cure time.
The product is not curing.
Check the expiration date. Ensure the product is stored properly and is not exposed to extreme temperatures.
Difficult to dispense.
Make sure the nozzle is clear and not clogged. If using a syringe, apply even pressure.
Pros and Cons
Pros
- Fast handling and set times.
- Bonds a wide range of materials.
- Waterproof and weather-resistant.
- Can be sanded and painted.
Cons
- Full cure time of 24 hours.
- Cream color may be visible on some clear plastics.
- Requires proper ventilation during use.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean and free of dirt, oil, or grease.
- Application: Apply the Devcon Plastic Welder to the surfaces to be bonded.
- Assembly: Join the parts together and hold them in place during the handling and set times.
- Curing: Allow 24 hours for full curing before stressing the bond.
*Compatibility*: Compatible with a wide range of materials, including plastics, metals, and composites. Test on a small area first.
*Care*: Store in a cool, dry place. Avoid direct sunlight. Clean up any spills immediately.