Tetrion Woodfil - 600g

Not Available Tetrion Woodfil - 600g

Not Available

Tetrion Ready Mixed Woodfil- Quick Drying For Inside & Out Tetrion Ready Mixed Woodfiller is our c...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to repair and restore wooden surfaces, from doors and skirting boards to frames. Tetrion Ready Mixed Woodfil offers a convenient, ready-to-use solution for filling gaps, cracks, and holes, both indoors and outdoors. While it boasts excellent adhesion and flexibility, remember to avoid use in damp or wet conditions for optimal results. It is ideal for most types of wood surfaces, making it an excellent choice for a wide variety of repair jobs.

All features

Model Part Number	TWF606
Brand	Tetrion

Extended Product Information

FAQs

Can I use Tetrion Ready Mixed Woodfil on exterior surfaces?

Yes, it is suitable for both interior and exterior repairs. However, it is essential to overpaint with an oil based paint when used externally and avoid use in damp or wet conditions.

How long does it take for the filler to dry?

Drying time is typically 2-3 hours, depending on the depth of application and environmental conditions.

Can I sand Tetrion Ready Mixed Woodfil?

Yes, it is easily sandable for a smooth finish.

Can I paint over the filler?

Yes, you can overpaint the filler with most oil-based paints.

Is Tetrion Ready Mixed Woodfil suitable for all types of wood?

Yes, it is suitable for most types of wood.

How should I store the product?

Replace the lid to ensure the remaining filler stays in good condition and store in a cool, dry place.

What if the product separates during storage?

If the product separates, simply stir it before use.

Can this be used on surfaces that are always underwater?

No, do not use it on surfaces regularly underwater.

Troubleshooting

Filler is not adhering properly.

Ensure the surface is clean, dry, and free of loose material. Lightly sand the area before application.

Filler is taking too long to dry.

Ensure the application is not too thick. Apply in thin layers, allowing each layer to dry completely (2-3 hours). Check the ambient temperature and humidity levels.

Filler is cracking after drying.

This may be due to the applied layer being too thick, or the wood moving. Apply in thin layers. Ensure the wood is dry before application. Consider using a flexible filler.

Pros and Cons

Pros

Ready to use, saving time and effort.
Suitable for both interior and exterior applications.
Excellent adhesion and flexibility.
Easy to sand for a smooth finish.
Can be overpainted or stained.

Cons

Not suitable for use in damp or wet conditions.
May stain or varnish differently to surrounding wood.
Deep repairs require multiple layers.
Not for use on surfaces regularly underwater.

Setup, Compatibility & Care

Preparation:

Ensure the surface is dry and free from dirt, grease, and loose material.
Lightly sand the area in the direction of the wood grain.
Remove any decayed wood down to dry, sound material.

Application:

If required, stir the filler before use.
Apply with a filler spreader, pressing firmly into the repair.
Smooth over with a wet spreader before it dries.
For deep repairs, apply in layers of no more than 5mm, allowing each layer to dry completely (2-3 hours).

Finishing:

Allow the filler to dry completely.
Sand to a smooth finish.
Finish with a stain, varnish, or oil-based paint.
Use an oil based paint when used externally.

Compatibility: Tetrion Ready Mixed Woodfil is compatible with most types of wood. Over-coatable with varnish, stain and most oil based paints.
Care:

Replace the lid after use to keep the remaining filler in good condition.
Store in a cool, dry place.
If the product separates, stir before use.