Hirschmann Right-angle Connector - 935-980-008-1
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Hirschmann 935-980-008-1 is a robust right-angle actuator connector designed for demanding industrial applications. It is ideal for engineers and technicians working with systems subject to vibration, such as heating systems, gas/oil burner controls, and general industrial machinery, offering reliable connectivity. A potential consideration is its specific standard compliance (DIN EN 175301-803 ISO 4400), requiring careful verification for your particular setup. Key features include its dustproof and shockproof construction, right-angle orientation for space-saving installations, and robust build quality.
All features
| Model Part Number | 935-980-008-1 |
|---|---|
| Brand | Hirschmann |
Extended Product Information
FAQs
What is the primary advantage of the right-angle design?
The right-angle design allows for easier cable management and space-saving installations, particularly in confined areas, by directing the cable away at a 90-degree angle.
What standard does this connector comply with?
This Hirschmann connector is approved to the DIN EN 175301-803 ISO 4400 standard.
Can this connector be used outdoors?
While the connector is dustproof and shockproof, its suitability for direct outdoor exposure depends on the overall system's environmental protection rating. It is designed for robust industrial environments, which may include outdoor applications if properly integrated into a protected system.
What size cable can the PG9 gland accommodate?
The PG9 cable gland is typically designed to accommodate cables with an outer diameter ranging from approximately 4mm to 8mm.
How do I clean the connector?
You can clean the connector using a dry or slightly damp cloth. Avoid using abrasive materials or chemical solvents that could damage the connector's housing or seals.
What types of applications is this connector best suited for?
It is ideal for applications subject to vibration, such as heating systems, gas/oil burner controls, industrial machinery, and other devices requiring a robust and reliable connection.
Troubleshooting
Connector not making a connection
Verify that both connectors are correctly mated and that the mating device meets the DIN EN 175301-803 ISO 4400 standard. Check for any obstructions or damage on the pins or sockets.
Loose cable connection
Tighten the PG9 cable gland around the cable. Ensure the cable's outer diameter is within the appropriate range for the PG9 gland.
Intermittent signal loss
Inspect the wiring within the connector for loose connections. Ensure the connector is adequately protected from vibration if the application demands it. Check the integrity of the mating connector.
Water or dust ingress
Ensure the PG9 cable gland is properly tightened and sealed around the cable. Inspect the connector's seals for damage and replace if necessary.
Pros and Cons
Pros
- Durable and shockproof design suitable for industrial use.
- Right-angle orientation aids in space-constrained installations.
- Meets DIN EN 175301-803 ISO 4400 standard for compatibility.
- Ideal for applications with vibration.
- Reliable and secure electrical connection.
Cons
- Specific standard compliance may limit universal application.
- PG9 cable gland size might not fit all cable diameters.
- Right-angle design may not be suitable for all mounting locations.
- Requires careful selection to match specific actuator and control systems.
Setup, Compatibility & Care
Setup:
- Ensure the mating connector is clean and free from debris.
- If using a cable, ensure it fits the PG9 cable gland specification.
- Carefully insert the actuator wires into the appropriate terminals within the connector.
- Secure the cable within the PG9 gland to ensure a dust-tight and strain-relieved connection.
- Mate the connector securely with its counterpart.
Compatibility:
- This connector is designed to meet the DIN EN 175301-803 ISO 4400 standard. Ensure your mating device also adheres to this standard for a proper fit and function.
- The PG9 cable gland is suitable for cables with an outer diameter typically ranging from 4mm to 8mm, though specific cable jacket rigidity can affect fit.
Care:
- Periodically inspect the connector for any signs of physical damage or wear.
- Clean the exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or solvents.
- Ensure the cable gland remains tight to maintain its sealing properties.