SIRAMICO COATINGS Anti Mould Paint - 1 Litre - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use SIRAMICO COATINGS Anti Mould Paint, ideal for homeowners looking to prevent mould and mildew in bathrooms and kitchens. The paint provides long-lasting protection against fungal growth for up to a decade. However, proper surface preparation is crucial for optimal performance.
All features
| Colour | White |
|---|---|
| Brand | SIRAMICO COATINGS |
Extended Product Information
FAQs
How long does the anti-mould protection last?
The paint provides anti-mould protection for up to ten years.
Can I use this paint in a shower?
Yes, this paint is suitable for use in bathrooms, including showers, as long as the surface is prepared correctly.
How many coats of paint are needed?
Two coats are generally recommended for optimal coverage and protection.
What surfaces can I apply this paint to?
You can apply this paint to interior wall surfaces, including brick, concrete, cement, and plaster.
How should I clean the surface before painting?
The surface should be dry, clean, and free from grease, dirt, rust, and loose or flaking material. Remove any mould with mould spray or bleach.
What tools can I use to apply the paint?
You can apply the paint by brush, roller, or airless spraying.
How much area does 1 litre of paint cover?
Coverage is up to 10 square metres per 1 litre.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean and free of contaminants. Lightly sand glossy surfaces for better adhesion.
Mould reappears after painting.
Thoroughly clean and remove all existing mould before painting. Ensure the room has adequate ventilation.
Uneven finish.
Apply the paint in even coats, avoiding excessive thickness. Use a high-quality brush or roller.
Pros and Cons
Pros
- Provides long-lasting anti-mould protection.
- Suitable for high-humidity areas like bathrooms and kitchens.
- Easy to apply with common painting tools.
- Can be applied on various interior surfaces.
- Ready-to-use formula saves time and effort.
Cons
- Requires thorough surface preparation for best results.
- Coverage is up to 10 square metres per litre, so you may need multiple cans depending on the surface area.
- May require multiple coats for optimal coverage and protection.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is dry, clean, and free from grease, dirt, rust, and loose materials. Remove any existing mould with a mould spray or bleach.
- Application: Apply the paint by brush, roller, or airless spraying.
- Drying Time: The paint dries in 1-2 hours. A second coat can be applied after 3-4 hours.
- Compatibility: Suitable for use on brick, concrete, cement, and plaster. Ensure the surface is compatible before application.