GROHE QuickGlue S - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to install or reattach their GROHE QuickFix shower rail and wall holder sets without drilling. The GROHE QuickGlue S provides a simple, adhesive-based solution for mounting on various surfaces. Keep in mind that a 24-hour curing time is required before use.
All features
| Colour | White |
|---|---|
| Model Part Number | 41247000 |
| Brand | Grohe |
Extended Product Information
FAQs
How long does the glue take to cure?
The GROHE QuickGlue S requires a 24-hour curing time for optimal bonding strength.
What surfaces can I use this glue on?
The glue is suitable for use on tiles, marble, stone, glass, concrete, wood, plastic, and metal.
Can I use this on wallpaper?
No, the GROHE QuickGlue S is not suitable for use on wallpaper, plaster, or certain plastics (PE, PTFE, PP).
How do I remove the shower rail if needed?
You can remove the shower rail or wall holder set by peeling it off with a spatula.
How many sets of glue do I need?
Since shower rails have two wall brackets, you will need two sets of the GROHE QuickGlue S.
What is included in the set?
The set includes one tube of glue, one mounting template for a shower rail, and one alcohol wipe.
Is the glue safe?
The product contains hazardous respirable dust, so avoid breathing the dust. For more information, visit www.grohe.com/safety-data-sheets/.
Troubleshooting
Shower rail or wall holder set feels unstable after installation.
Ensure that the glue has fully cured for 24 hours. Check that the mounting surface is clean and free of any contaminants. If the issue persists, check that the correct amount of glue was applied and that the surface is suitable for the glue (not wallpaper, plaster, or unsuitable plastics).
Glue did not adhere to the surface.
Make sure the surface is compatible with the glue (tiles, marble, stone, glass, concrete, wood, plastic and metal) and that it was cleaned with the alcohol wipe provided. Ensure no dust, dirt, or grease is present. Verify that the glue is not expired.
Pros and Cons
Pros
- No drilling required, preserving wall integrity.
- Easy to install in a few straightforward steps.
- Suitable for a wide range of surfaces.
- Easy removal allows for adjustments.
Cons
- Requires a 24-hour curing time before use.
- Not suitable for use on wallpaper, plaster, and certain plastics (PE, PTFE, PP).
- Requires the use of two sets for shower rails with two wall brackets.
Setup, Compatibility & Care
- Preparation: Clean the surface where the glue will be applied with the provided alcohol wipe. Ensure the surface is dry.
- Application: Apply the glue to the mounting plate of your shower rail or wall holder set.
- Mounting: Align the plate with the mounting template and press firmly onto the prepared surface.
- Curing: Allow 24 hours for the glue to fully cure before using the shower rail or wall holder set.
- Compatibility: This product is compatible with GROHE QuickFix shower rail and wall holder sets and suitable for various surfaces including tiles, marble, stone, glass, concrete, wood, plastic, and metal.
- Care: To remove, peel off with a spatula. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water.