Porcelaine 150 Outliner Paint - PEBEO
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Pebeo Porcelaine 150 Outliner Paint is designed for artists, crafters, and home decorators looking to add precise, raised details to ceramic and glass surfaces. Its key benefit is the ability to create intricate patterns and lettering with a smooth, controlled application, resulting in a professional, dimensional finish. A potential caveat is the need for heat-setting to achieve permanence and dishwasher safety.
All features
| Brand | Pebeo |
|---|
Extended Product Information
FAQs
What surfaces can I use Pebeo Porcelaine 150 Outliner Paint on?
This paint is designed for use on porcelain, ceramic, earthenware, terracotta, and glass.
Does the paint need to be baked to become permanent?
Yes, heat-setting in a home oven at 150°C (300°F) for 35 minutes is required to make the paint permanent and dishwasher-safe.
How do I clean up the paint?
The paint is water-based, so it can be cleaned with water and soap before it has been heat-set. Clean the nozzle with water immediately after use.
Can I use this paint on dishes that will be in contact with food?
No, the paint is for decorative purposes only and should not be used on surfaces that come into direct contact with food.
How long does the paint take to dry before baking?
The paint should be allowed to air dry for at least 24 hours before heat-setting in the oven.
What is the shelf life of the paint?
When stored correctly in a cool, dry place with the cap tightly sealed, the paint typically maintains its quality for several years.
Can I mix the colors?
Yes, the colors within the Pebeo Porcelaine 150 range can be mixed together before drying to create custom shades.
Troubleshooting
Paint is not dispensing smoothly.
Ensure the nozzle is not clogged. Carefully clear any dried paint with a fine needle or pin. Check if the tube has been squeezed too hard, which can cause uneven flow.
Lines are too thick or uneven.
Practice on a scrap surface first to get a feel for the pressure needed. Hold the tube at a consistent angle and apply gentle, steady pressure. Clean up any mistakes with a damp cloth before the paint dries.
Paint is peeling or rubbing off after application.
Ensure the surface was thoroughly cleaned and dried before painting. Double-check that the paint was properly heat-set according to the instructions. Insufficient heat-setting is the most common cause of poor adhesion.
The paint is not drying.
Ensure the paint is applied in a thin, even layer. Thick applications can take longer to dry. Make sure the ambient temperature is not excessively cold or humid, as this can affect drying times. Avoid touching the painted area until it is dry to the touch.
Pros and Cons
Pros
- Provides a distinct raised effect for professional-looking embellishments.
- The fine tip allows for exceptional control and detailed work.
- Suitable for a wide range of ceramic and glass surfaces.
- Dishwasher-safe finish after proper heat-setting.
- Water-based formula makes cleanup simple.
Cons
- Requires heat-setting in an oven for durability.
- May require practice for beginners to achieve perfect lines.
- Limited to specific heat-resistant surfaces.
- 20ml tube size might be limiting for very large projects.
Setup, Compatibility & Care
Setup: The Pebeo Porcelaine 150 Outliner Paint is ready to use straight from the 20ml tube. Ensure the nozzle is clear before starting. For best adhesion, make sure the surface you are decorating is clean, dry, and free from grease or dust.
Compatibility: This paint is compatible with porcelain, ceramic, earthenware, terracotta, and glass. It is not suitable for surfaces that are in direct contact with food or flames.
Care:
- Allow the paint to air dry for a minimum of 24 hours after application.
- Once dry, heat-set the paint by placing the decorated item in a preheated oven at 150°C (300°F) for 35 minutes. Do not place the item in the oven while it is heating up; ensure the oven is already at temperature.
- After the heat-setting process and once the item has completely cooled down, it becomes dishwasher-safe. Handwashing is recommended for longevity if using abrasive detergents or high temperatures in the dishwasher.
- Clean the nozzle immediately after use with water if any paint residue is present to prevent clogging.