Wetwall Platinum Stone Shower Panel - Tongue and Groove - 2420 x 585mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners seeking to upgrade their bathrooms with a modern, stylish, and easy-to-install shower wall solution. The Wetwall Platinum Stone Shower Panel offers a striking concrete aesthetic with its deep grey tone and natural stone texture, eliminating the need for grouting and providing a 100% waterproof surface. Please note that while installation is straightforward, proper surface preparation is crucial for achieving the lifetime performance guarantee.
All features
| Brand | Wetwall |
|---|
Extended Product Information
FAQs
Can I install Wetwall panels myself?
Yes, installation is designed to be user-friendly, but it's important to follow the instructions carefully. Professional installation is recommended for complex installations or if you're not comfortable with DIY projects.
What tools do I need for installation?
You'll need a measuring tape, level, saw (circular saw or jigsaw), adhesive, sealant, and a caulking gun. Always refer to the manufacturer's guidelines for a full list.
Do I need to remove my existing tiles before installing Wetwall panels?
No, Wetwall panels can often be installed directly over existing tiles, provided the surface is clean, dry, and level. Check the specific product instructions for confirmation.
How do I clean Wetwall panels?
Use a damp cloth with mild soap or detergent. Avoid abrasive cleaners, bleach, or harsh chemicals that could damage the surface.
What is the warranty on Wetwall Platinum Stone panels?
Wetwall panels come with a lifetime performance guarantee when installed using Wetwall sealant.
Can I cut the panels to fit around fixtures?
Yes, the panels can be cut using appropriate tools. Precise measurements and cuts are essential for a professional finish.
What if the panels get damaged?
Minor scratches can be repaired using a laminate repair kit. For more significant damage, consider replacing the affected panel.
Troubleshooting
Water leaking behind the panels.
Check the sealant around the joints and edges. Reapply sealant if necessary, ensuring a watertight seal. Ensure proper panel installation.
Panels not adhering properly.
Ensure the wall surface is clean and dry before applying adhesive. Use the recommended adhesive and follow the manufacturer's instructions. Verify that the panels are firmly pressed against the wall.
Visible gaps between panels.
Ensure accurate measurements and precise cutting of panels. Use a level during installation to ensure the panels are aligned. Apply sufficient sealant to fill any small gaps.
Surface scratches or damage.
Avoid using abrasive cleaners or tools. Protect the surface from impacts. Repair minor scratches using a suitable laminate repair kit.
Pros and Cons
Pros
- Easy to install, saving time and labor costs compared to traditional tiling.
- Completely waterproof, protecting walls from water damage.
- Hygienic and easy to clean, requiring minimal maintenance.
- Provides a modern, stylish aesthetic with its concrete look.
- Can be installed over existing tiles, reducing demolition work.
- Offers a lifetime performance guarantee with proper sealant use.
Cons
- Requires careful measurement and cutting for a precise fit.
- May require professional assistance for complex installations.
- Surface preparation is crucial for optimal adhesion and performance.
- The initial cost may be higher than some other wall panel options.
- Limited to the designs available in the Wetwall range.
- Requires Wetwall sealant for the lifetime performance guarantee.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the existing wall surface is clean, dry, and structurally sound. Remove any loose tiles, debris, or old adhesive.
- Measurements: Accurately measure the shower area and cut the panels to the required size, using appropriate tools.
- Adhesive Application: Apply a recommended adhesive (check manufacturer's guidelines) to the back of the panel.
- Panel Placement: Carefully position the panel on the wall, ensuring it is level and aligned.
- Sealing: Apply Wetwall sealant to all joints and edges to create a waterproof seal.
Compatibility:
- Compatible with most standard shower enclosures and bathroom layouts.
- Can be installed over various wall surfaces, including drywall and existing tiles.
- Ensure compatibility with the adhesive and sealant products recommended by Wetwall.
Care:
- Clean the panels regularly with a mild detergent and a soft cloth.
- Avoid abrasive cleaners and harsh chemicals, which can damage the surface.
- Inspect the sealant periodically and reapply as needed to maintain a waterproof seal.