Tamiya Acrylic Paint 10ml - XF-65 Field Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers and hobbyists looking to achieve a realistic Field Grey finish using Tamiya XF-65 acrylic paint. The paint is known for its fine pigment and ease of use with both brushes and airbrushes. However, achieving the best results requires proper surface preparation. This guide will provide the necessary information for effective use.
All features
| Model Part Number | XF-65 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
Can I use this paint on materials other than plastic?
While primarily for plastic models, it can also be used on other materials like resin. Always test on a small area first to check for compatibility and adhesion.
How do I thin the paint for airbrushing?
Use Tamiya X-20A acrylic thinner. Start with a ratio of approximately 1:1 paint to thinner, adjusting as needed based on your airbrush and desired effect.
What kind of primer should I use?
Any primer designed for plastic models will work. Tamiya's primer range is a good option.
How many coats of paint should I apply?
Apply multiple thin coats, allowing each coat to dry completely before applying the next. This typically means 2-3 coats.
How long does it take for the paint to dry?
The paint usually dries to the touch in about 30-60 minutes, but it's best to wait 1-2 hours for complete drying before handling or applying further coats.
Can I mix this paint with other Tamiya acrylic colors?
Yes, Tamiya acrylic paints are designed to be mixed together to create custom colors.
How do I clean my airbrush after use?
Disassemble your airbrush and clean all parts thoroughly with Tamiya X-20A acrylic thinner or a dedicated airbrush cleaner.
What is the best way to store this paint?
Store the paint in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed to prevent the paint from drying out.
Troubleshooting
Paint is clumping or not flowing smoothly.
Ensure paint is properly thinned for your application method. Clean your brush or airbrush thoroughly.
Paint is peeling or not adhering to the surface.
Ensure the model surface is properly prepared, including priming. Apply thin coats and allow them to dry completely.
Color appears uneven or streaky.
Apply multiple thin coats instead of one thick coat. Use consistent brush strokes or airbrush technique.
Pros and Cons
Pros
- Easy to use for beginners and experienced modelers.
- Provides excellent coverage with a smooth finish.
- Dries quickly, allowing for multiple coats.
- Compatible with a wide range of model surfaces.
Cons
- Requires proper surface preparation for optimal adhesion.
- May require thinning for airbrush use.
- Color accuracy may vary slightly depending on application technique.
- 10ml bottle may not be sufficient for large projects.
Setup, Compatibility & Care
- Preparation: Ensure the model surface is clean and free of dust, grease, and fingerprints. Primer is recommended for best results.
- Thinning (for airbrush): Tamiya X-20A acrylic thinner is recommended for airbrushing. Thin the paint according to the airbrush manufacturer's guidelines.
- Application (Brush): Apply thin, even coats with a brush. Multiple thin coats are better than one thick coat.
- Application (Airbrush): Use a medium air pressure and apply thin coats, allowing each coat to dry before applying the next.
- Drying Time: Allow the paint to dry completely (approximately 1-2 hours) before handling or applying further coats.
- Cleaning: Clean brushes and airbrushes with Tamiya X-20A acrylic thinner or a suitable acrylic cleaner.
- Compatibility: Compatible with most plastic model kits and other hobby materials. Always test on a small, inconspicuous area first.
- Storage: Store the paint in a cool, dry place away from direct sunlight.