Fresco Artisan Leaf Sage Wallpaper - Green



Currently unavailable



Currently unavailable
This guide is for anyone looking to install the Fresco Artisan Leaf Sage Wallpaper. The wallpaper is ideal for adding a touch of elegance to any room with its delicate leaf design. However, be aware that perfect pattern matching may require extra care and planning due to the trail design.
| Colour | Green |
|---|---|
| Brand | Fresco |
Use a paste-the-paper adhesive specifically designed for non-woven wallpapers. Follow the paste manufacturer's instructions for mixing and application.
Gently wipe the wallpaper with a clean, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
While the wallpaper is suitable for most rooms, ensure the bathroom is well-ventilated to prevent moisture damage.
To remove, you'll need to wet the wallpaper with a wallpaper remover solution. Let it soak and then gently peel it off. Use a scraper if needed.
Each roll measures 52 x 1000cm.
Yes, it uses the paste-the-paper application method which simplifies the installation process.
Suitable for most interior walls, including drywall and plaster.
Ensure the wall is properly prepared, with primer applied. Check that the paste is applied evenly and the wallpaper is pressed firmly against the wall, especially at the edges. Make sure you are using the correct paste for the paper.
Use a smoothing brush or roller to press out air bubbles from the center to the edges. Ensure the wall is smooth before applying the wallpaper. If bubbles persist, gently lift the wallpaper and re-apply.
Carefully align the patterns before applying. Measure and mark the walls to help align the pattern. Trim the edges precisely.