Liberon Verdigris Wax 250ml - LIBVW250N
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Verdigris Wax is for DIY enthusiasts and crafters looking to add unique, oxidized copper and brass effects to various interior surfaces like wood, metal, stone, and plaster. Its key benefit is the ability to easily create a distinctive verdigris patina for decorative purposes, particularly on intricate details. A caveat is that it is designed for interior use only and its effectiveness on non-porous surfaces may vary.
All features
| Model Part Number | 126822 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Can Liberon Verdigris Wax be used outdoors?
No, Liberon Verdigris Wax is specifically designed for interior use only. It will not withstand outdoor conditions.
What surfaces can I use this wax on?
It is versatile and can be used on wood, metal, stone, plastic, plaster, papier-mâché, and alabaster.
How do I clean my tools after using the wax?
Tools and any excess wax should be cleaned immediately after use with White Spirit.
How long does it take for the wax to dry?
The wax has a quick drying time of approximately 5 minutes.
What is the coverage rate of Liberon Verdigris Wax?
Each litre of wax covers approximately 8-12 square meters, depending on the surface and application.
Can I apply this wax over existing paint or varnish?
Yes, it can be applied over colored wood or existing finishes, provided the surface is clean and sound. For bare wood, it provides a decorative finish.
How do I achieve a deeper verdigris effect?
You can achieve a deeper color by applying additional thin coats of the wax after the previous coat has dried. Buffing lightly between coats can also enhance the effect.
Troubleshooting
Wax is not adhering well to the surface.
Ensure the surface is properly prepared, clean, dry, and free from any contaminants like oil or dust. For very smooth or non-porous surfaces, a primer may be necessary.
Uneven color or streaky finish.
Apply the wax in thin, even coats using light pressure. Buffing gently with a clean cloth after drying can help to even out the appearance. Ensure the steel wool is evenly saturated with wax.
Wax remains tacky after application.
This can happen if too much wax is applied or if the drying conditions are humid. Ensure thin coats are used and allow adequate drying time. Gently buffing with a clean cloth can sometimes resolve tackiness.
Difficulty achieving desired verdigris effect.
The effect depends on the base material and application technique. Experiment with different amounts of wax and buffing pressure. Applying multiple thin coats can build up the effect gradually.
Pros and Cons
Pros
- Achieves unique decorative verdigris effects easily.
- Suitable for a wide range of interior materials.
- Quick drying time speeds up crafting and decorating processes.
- Easy application method with common tools.
- Buffs to a pleasant, soft sheen.
Cons
- Strictly for interior use.
- May require surface preparation on certain materials for best adhesion.
- Effectiveness on very smooth or non-porous surfaces might be limited without proper priming.
- Color may vary depending on the base material and application thickness.
Setup, Compatibility & Care
Application:
- Ensure the surface is clean, dry, and free from dust or grease.
- Apply a small amount of Liberon Verdigris Wax to a clean steel wool pad (medium or fine grade).
- Rub the steel wool pad over the surface in the direction of the grain for wood, or in a circular motion for other materials.
- Apply thin, even coats.
- Allow to dry for approximately 5 minutes.
- Buff with a clean, soft cloth to achieve a soft sheen.
- For a deeper color, apply additional coats after the previous one has dried.
Compatibility:
- Suitable for: Bare or previously finished wood, metal, stone, plastic, plaster, papier-mâché, alabaster.
- Location: Interior use only.
Care:
- Tool Cleaning: Clean applicators and any excess wax immediately after use with White Spirit.
- Maintenance: The waxed surface can be maintained by gentle buffing. For deeper cleaning, use a slightly damp cloth and ensure the surface is dried thoroughly. Avoid harsh detergents.