Wagner Control Pro 150 M Airless Paint Sprayer - 350W
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users get the most out of their Wagner Control Pro 150 M Airless Paint Sprayer. It's designed for DIY enthusiasts and professionals seeking efficient paint application on medium to large projects. The sprayer's High Efficiency Airless (HEA) technology provides excellent control and reduces overspray, leading to faster results and less waste. Note that this sprayer is not suitable for textured masonry paint.
All features
| Model Part Number | 2394313 |
|---|---|
| Brand | Wagner |
Extended Product Information
FAQs
What kind of paint can I use with this sprayer?
You can use water-based paints and solvent-containing lacquers and glazes. Avoid textured masonry paint.
How do I clean the sprayer?
Follow the cleaning instructions in the user manual. Rinse with appropriate solvent based on the paint type and ensure all paint is removed.
What is the purpose of the different spray tips?
The Control Pro 311 tip is for thinner materials, while the Control Pro 515 tip is for thicker materials, like emulsion.
How do I prime the sprayer?
Fill the tank with paint, and follow the priming procedure outlined in the user manual to remove air from the system.
What is the maximum spraying pressure?
The maximum spraying pressure is 110 bar.
What is the air hose length?
The air hose length is 7.5m.
Can I use this sprayer for large commercial projects?
The Control Pro 150 M is designed for medium to large DIY projects and home use. For commercial projects, consider a more heavy-duty model.
Troubleshooting
Sprayer is not turning on.
Check the power connection and ensure the outlet is working. Verify the power switch is in the 'on' position.
Poor paint flow or sputtering.
Check for clogs in the spray tip or filter. Clean or replace as needed. Ensure the paint viscosity is correct for the tip being used.
Excessive overspray.
Ensure the correct spray tip is being used for the paint type. Adjust the pressure settings if possible. Maintain the correct distance and angle from the surface.
Uneven paint coverage.
Maintain a consistent spray pattern and overlap each pass slightly. Ensure the paint is properly mixed and the sprayer is primed correctly.
Pros and Cons
Pros
- Reduces overspray, saving paint and minimizing cleanup.
- Provides a more even and consistent finish compared to traditional methods.
- Offers fast application, ideal for large areas.
- Lightweight and portable design for ease of use.
- Comes with two tips to handle different paint viscosities.
Cons
- Not suitable for textured masonry paint.
- Requires proper setup and cleaning to maintain performance.
- May require some practice to achieve optimal results.
- The 5.5 litre tank may require frequent refilling for very large projects.
Setup, Compatibility & Care
Setup
- Unpack and Assemble: Refer to the user manual for complete assembly instructions. Ensure all parts are connected securely.
- Connect to Power: Plug the sprayer into a grounded power outlet. The input power is 350W.
- Prime the Sprayer: Fill the tank with paint and follow the priming instructions to remove air from the system.
- Select the Tip: Choose the appropriate tip (311 for thin materials, 515 for thicker) based on your paint type.
Compatibility
- Compatible Paints: Water-based paints, solvent-containing lacquers, and glazes.
- Incompatible Paints: Textured masonry paint.
Care
- Cleaning: Thoroughly clean the sprayer after each use to prevent paint from drying and clogging the system. Use appropriate cleaning solvents for the type of paint used.
- Tip Maintenance: Regularly inspect and clean the spray tips. Replace them when they become worn or damaged.
- Storage: Store the sprayer in a clean, dry place when not in use.
- Filter Maintenance: Replace the filters as needed to maintain optimal performance.