Everbuild PINKGRIP - Pink
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Everbuild PINKGRIP adhesive. It's designed to bond virtually anything to common building surfaces, offering high grab strength and eliminating the need for temporary supports in many applications. A key benefit is its ability to bond both porous and non-porous materials. Keep in mind that while it's versatile, surface preparation is crucial for optimal results.
All features
| Colour | Pink |
|---|---|
| Model Part Number | PINKGRIP |
| Brand | Everbuild |
Extended Product Information
FAQs
What surfaces can PINKGRIP be used on?
PINKGRIP can be used on most common building surfaces, including wood, brick, concrete, plasterboard, and more.
Can I use it outdoors?
Yes, PINKGRIP is suitable for both interior and exterior use.
How long does it take to cure?
Curing time varies depending on environmental conditions (temperature, humidity), but it typically cures within 24-72 hours.
Is it paintable?
Yes, PINKGRIP is over-paintable once it has fully cured.
How should I store PINKGRIP?
Store in a cool, dry place, away from direct sunlight and extreme temperatures.
How do I clean up spills?
Uncured adhesive can be cleaned up with a solvent like white spirit. Cured adhesive may need to be removed mechanically.
Do I need to use any temporary supports?
No, PINKGRIP's high grab strength often eliminates the need for temporary supports in most applications.
Troubleshooting
Weak bond or adhesive failure.
Ensure surfaces were properly prepared (clean, dry, and free from contaminants). Ensure that you have applied enough adhesive.
Slow curing time.
Check the temperature and humidity. Lower temperatures and high humidity can slow curing.
Adhesive not dispensing properly.
Check the nozzle for blockages and ensure the cartridge is properly inserted into the applicator gun.
Pros and Cons
Pros
- High initial grab strength
- Suitable for both interior and exterior use
- Excellent for bonding various materials
- Reduces the need for temporary supports
- Over-paintable for a seamless finish
Cons
- Requires proper surface preparation for best results
- Solvent-based, which may require adequate ventilation
- Pink color might be visible if not painted over
- May not be suitable for all types of materials
Setup, Compatibility & Care
Setup
- Ensure surfaces are clean, dry, and free from dust, grease, and loose particles.
- Cut the nozzle to the desired bead size.
- Apply PINKGRIP to one surface in a zigzag pattern or as required.
- Bring the surfaces together and apply firm pressure.
- Allow to cure according to the product instructions.
Compatibility
PINKGRIP is compatible with most common building materials, including wood, brick, concrete, plasterboard, and more. Always test on a small, inconspicuous area first, especially when bonding to plastics or sensitive materials.
Care
- Store in a cool, dry place.
- Avoid extreme temperatures.
- Clean up any uncured adhesive with a solvent like white spirit.
- Once cured, it can be removed mechanically.