AM Clad Two Part Adhesive - 6.5kg
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The AM Clad Two Part Adhesive is a professional-grade bonding solution tailored for contractors and installers who need a secure, high-strength attachment for AM Clad wall cladding sheets. Its primary benefit is the specialized chemical bond that ensures long-term vertical stability on various substrates, though users must be aware that the two-part formula requires precise mixing and has a limited pot life once activated.
All features
| Model Part Number | AMTPA |
|---|---|
| Brand | AM Clad |
Extended Product Information
FAQs
How much adhesive do I need for one sheet?
Each 6.5kg tub is specifically designed to cover one 2440mm cladding sheet.
Can I use this adhesive on wood surfaces?
Yes, it is compatible with most clean, dry timber substrates.
How do I clean my tools after using the adhesive?
Clean tools immediately with an appropriate solvent before the adhesive begins to cure.
Is this adhesive suitable for damp areas?
Yes, it is formulated to maintain its bond in environments where moisture is present, such as kitchens or bathrooms.
What is the shelf life of the unopened adhesive?
Please check the product packaging for the specific expiration date and storage requirements provided by the manufacturer.
Troubleshooting
Adhesive is not setting or remaining tacky.
Verify the mixing ratio was accurate and the two components were thoroughly blended.
Cladding sheet is pulling away from the wall.
Check that the substrate was clean and free of moisture or dust prior to application.
Adhesive cured too quickly during application.
Keep containers away from heat sources and only mix what can be applied within the specified pot life.
Pros and Cons
Pros
- Provides an extremely secure and permanent structural bond.
- Specifically engineered for use with AM Clad system sheets.
- Pre-measured tub size eliminates guesswork for standard sheet sizes.
- Maintains integrity in high-moisture commercial environments.
Cons
- Requires careful mixing of two parts to ensure effective curing.
- Limited working time once the two components are combined.
- Not suitable for use on extremely uneven or crumbling substrates without preparation.
- Requires proper safety gear to avoid skin or eye irritation during mixing.
Setup, Compatibility & Care
Before starting, ensure all components are at room temperature. Follow the manufacturer's mixing instructions precisely to ensure the curing agent is thoroughly incorporated into the base resin. The adhesive is compatible with most standard wall substrates including plasterboard, cement render, and timber, provided they are primed appropriately. Store the product in a cool, dry area away from direct sunlight. Once the adhesive is applied, the cladding sheets should be pressed firmly into place and supported until the initial tack holds. Tools should be cleaned immediately with the manufacturer's recommended solvent before the adhesive cures, as it becomes nearly impossible to remove once hardened.