BabyDan Ebba Wall Mounted Safety Gate - 67 - 105.5cm - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The BabyDan Ebba Wall Mounted Safety Gate is designed for parents seeking reliable and flexible child safety solutions for stairs and doorways. Its key benefit is a highly adaptable, sturdy wall-mounted design that fits openings from 67cm to 105.5cm, even at angles. A caveat is that it requires permanent screw fastening, meaning it's not a temporary or pressure-fit solution. This gate offers one-handed operation, dual-direction opening, and tool-free installation after the initial mounting, ensuring a secure environment for your child.
All features
| Brand | BabyDan |
|---|
Extended Product Information
FAQs
What is the maximum width this gate can cover?
The BabyDan Ebba Wall Mounted Safety Gate is designed to fit openings between 67 cm and 105.5 cm.
Does this gate require drilling?
Yes, this is a wall-mounted gate and requires screw fastening into the wall or door frame for secure installation.
Can I install this gate on an angle?
Yes, the gate features swivel brackets that allow for mounting even at oblique angles.
How tall is the gate?
The gate itself is 69.5 cm tall. The total mounted height, including the top wall bracket, is 80.5 cm.
Can I remove the gate without tools?
Once the initial wall brackets are installed, the gate itself can be removed and reinstalled without tools for convenience.
Does the gate open in both directions?
Yes, the gate is designed for dual-direction opening, providing flexibility in how it swings.
What is the recommended cleaning method?
Clean the gate using a damp cloth and a mild detergent. Avoid using abrasive cleaners.
Troubleshooting
Gate does not close properly.
Ensure the gate is level and securely attached to the wall brackets. Check that the opening width is within the specified range (67-105.5 cm) and adjust the gate accordingly.
Screws do not hold securely.
Verify that the mounting surface is solid. If installing into drywall, use appropriate wall anchors designed for the weight and type of wall. Ensure you are not attempting to mount into a void.
One-handed operation is stiff.
Check for any obstructions in the gate's path or around the latch mechanism. Ensure all mounting brackets are aligned correctly.
Gate is wobbly after installation.
Re-tighten all screws securing the wall brackets. Confirm that the swivel brackets, if used, are also firmly tightened.
Pros and Cons
Pros
- Highly adaptable fit for various opening widths.
- Suitable for angled installations.
- Secure and permanent wall-mounted design.
- Convenient one-handed operation.
- Easy to remove and reinstall without tools after initial setup.
Cons
- Requires permanent screw installation into walls or frames.
- Not suitable for temporary or pressure-fit needs.
- Initial installation requires basic tools.
Setup, Compatibility & Care
Setup:
- Identify the desired mounting location (doorway, stair base).
- Use the included brackets to mark screw positions on the wall or door frame.
- Ensure the mounting surface is suitable for screw fastening (avoid hollow walls without appropriate anchors).
- Screw the brackets securely into place. Use wall anchors if necessary for drywall installation.
- Attach the gate to the mounted brackets. Adjust the gate's width to fit the opening.
Compatibility:
- Fits openings from 67 cm to 105.5 cm.
- Suitable for mounting inside or outside door frames.
- Can be mounted on flat surfaces or at oblique angles using swivel brackets.
- Requires a solid surface for secure screw fastening.
Care:
- Clean the gate with a damp cloth and mild detergent.
- Avoid abrasive cleaners or solvents.
- Regularly check that screws remain tight and the gate is securely mounted.