Laura Ashley Emulsion Paint - Pale Chalk Pink

Currently unavailable

Currently unavailable
This guide is for homeowners and DIY enthusiasts looking for a premium, water-based emulsion paint for kitchens and bathrooms. The Laura Ashley Emulsion Paint in Pale Chalk Pink offers a beautiful, soft sheen finish with rich pigments for excellent depth of colour and even coverage. A key benefit is its suitability for high-moisture environments. Please note, as this paint is mixed to order, it cannot be returned unless there are quality issues, which contributes to its eco-friendly nature by minimizing waste.
| Colour | Pink |
|---|---|
| Brand | Laura Ashley |
This emulsion paint is specifically formulated for kitchens and bathrooms due to its high-moisture resistance. While it can be used elsewhere, its specialized properties are most beneficial in these areas.
The paint offers excellent coverage of approximately 12 square meters per litre.
As this paint is mixed to order, it cannot be returned unless there is a quality issue with the product.
Clean painted surfaces with a soft, damp cloth. For tougher marks, a mild detergent can be used, but always wipe the area clean afterwards.
The paint provides a soft sheen finish, offering a subtle lustre without excessive reflection.
Typically, two coats are recommended for best results, providing optimal colour depth and coverage. Always allow adequate drying time between coats.
Mixing to order is an eco-friendly practice that minimizes waste, ensuring that the paint is produced specifically for your needs.
Ensure the paint was stirred thoroughly before and during application. Apply paint evenly and avoid over-spreading. Ensure adequate lighting to see where paint has been applied. Two coats are generally recommended.
The surface may not have been properly prepared. Ensure the wall is clean, dry, and free from dust or grease. Glossy surfaces should be lightly sanded, and a primer may be necessary on porous or previously unpainted surfaces.
Use a good quality brush or roller and apply paint with consistent strokes. Avoid applying too thickly and work methodically. Ensure you are using the correct technique for cutting in and rolling large areas.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For previously painted surfaces, apply a suitable primer if necessary.
Application: Stir the paint thoroughly before use. Apply with a brush or roller, typically requiring two coats for best results. Allow adequate drying time between coats as per the manufacturer's recommendations (usually 2-4 hours).
Compatibility: Suitable for interior walls and ceilings in kitchens and bathrooms. Test on an inconspicuous area first if unsure about surface compatibility.
Care: Clean with a soft, damp cloth. For tougher stains, use a mild detergent solution and wipe clean immediately. Avoid abrasive cleaners.