Shopping.co.uk

Balterley Mavesyn Contemporary 2 Door Floor Standing Vanity Unit With Mid-Edge Basin - White - 500mm

Not AvailableBalterley Mavesyn Contemporary 2 Door Floor Standing Vanity Unit With Mid-Edge Basin - White - 500mm
Not Available

The Balterley Mavesyn contemporary vanity unit offers a sophisticated, furniture-led solution for ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Balterley Mavesyn 500mm vanity unit is designed for homeowners looking to maximize storage in compact bathroom spaces without sacrificing modern aesthetics. This floor-standing unit provides a stable, furniture-led solution that keeps plumbing hidden while offering generous storage behind two soft-close doors, though users should note it arrives fully assembled, requiring sufficient clearance for maneuverability during installation.

All features

ColourWhite
Model Part NumberBFRA107A
BrandBalterley

Extended Product Information

FAQs

Does the unit come with the tap and waste included?

No, the unit includes the vanity and integrated basin only. Taps and waste fittings must be purchased separately.

Is the cabinet door soft-close?

Yes, the unit is designed with modern soft-close hinges to prevent slamming and reduce wear.

What are the dimensions of the unit?

The unit is 500mm wide, designed for compact to medium-sized bathrooms.

Can this be installed in a wet room?

While the unit is moisture-resistant, it is not waterproof. Avoid direct spray from showers and ensure good bathroom ventilation.

Do I need to assemble the cabinet?

No, the Balterley Mavesyn arrives fully assembled, saving significant installation time.

Troubleshooting

Basin does not sit flush against the wall

Check if the wall is bowed or uneven; you may need to apply a bead of sanitary silicone to bridge the gap.

Water pooling on basin surface

Ensure the unit is perfectly level during installation to allow proper drainage toward the central waste.

Pros and Cons

Pros

  • Arrives fully assembled for immediate installation
  • Easy-to-clean integrated basin surface
  • Versatile design matches a wide range of tap styles
  • Generous storage capacity for its compact width

Cons

  • Floor-standing design may be harder to clean underneath than wall-hung units
  • 500mm width may be too small for shared family bathrooms
  • Requires professional plumbing connections for basin waste

Setup, Compatibility & Care

For installation, ensure your wall is level before placing the floor-standing unit. The unit is compatible with all standard UK basin waste fittings and standard monobloc basin mixers.

Installation Steps:

  1. Position the unit in the desired location and check levels.
  2. Secure the unit to the wall using appropriate fixings for your wall type (masonry vs. stud).
  3. Install the basin mixer onto the basin prior to fitting the waste trap.
  4. Connect the water supply lines and the waste pipe to your existing plumbing.
  5. Seal the rear edge of the basin against the wall with high-quality sanitary silicone to prevent moisture penetration.

Care Tips:

  • Wipe surfaces down with a soft, damp cloth after use to prevent lime-scale buildup.
  • Avoid using abrasive scouring pads or harsh chemical cleaners which can dull the finish.
  • Periodically check the trap and waste connections for any signs of leaks.