Balterley Bathroom Wall Hung Vanity Unit Basin - Grey

Currently unavailable

Currently unavailable
This Balterley 500mm Wall Hung Vanity Unit is designed for homeowners seeking a modern, space-saving bathroom solution. Its key benefit is maximizing usable space in smaller bathrooms, combined with a durable and easy-to-clean dark grey finish and high-quality ceramic basin. A potential caveat to consider is its 345mm depth, which may limit the storage capacity for larger items.
| Colour | Grey |
|---|---|
| Model Part Number | 5056883710975 |
| Brand | Balterley |
No, the tap is not included with this vanity unit. You will need to purchase a compatible tap separately.
The basin is designed for use with a standard slotted basin waste and a compatible overflow fitting. Please ensure your chosen fittings are suitable for ceramic basins.
While minor assembly might be straightforward, wall mounting and plumbing connections require specific skills and tools. Professional installation by a qualified tradesperson is highly recommended for safety and proper function.
The unit has a width of 500mm and a depth of 345mm. The height will depend on the specific product measurements, but it is designed to be wall-hung at a comfortable user height.
Clean the dark grey finish using a soft, damp cloth with a mild detergent. Wipe dry afterward. Avoid abrasive cleaning products.
Please refer to the product packaging or the retailer's website for specific warranty information, as this can vary.
Ensure the wall fixings are secure and appropriate for your wall type. Check that the unit is correctly seated against the wall and the mounting hardware is fully tightened.
Inspect the hinges for any obstructions. Ensure the doors are properly aligned. Minor adjustments to the hinge screws may be necessary.
Check that the basin waste is correctly installed and sealed. Ensure the overflow is not blocked.
Clean the unit with a soft, damp cloth and mild soap. Avoid abrasive cleaners. If staining persists, consult the manufacturer's guidelines for specific cleaning agents.
Setup: This vanity unit is designed for wall mounting. Ensure you have appropriate wall fixings for your wall type (e.g., brick, stud, plasterboard). It is highly recommended that installation is performed by a qualified plumber or bathroom fitter to ensure secure mounting and proper plumbing connections. The unit comes pre-assembled, but the basin and unit are typically attached.
Compatibility: The unit is designed to connect to standard UK plumbing systems. Ensure you have appropriate hot and cold water supply lines and a waste pipe connection accessible at the installation point. The basin is compatible with standard slotted or unslotted basin wastes and single-hole taps (tap not included).
Care: To maintain the dark grey finish and ceramic basin, clean regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the surface. For stubborn marks, use a mild detergent diluted with water. Wipe dry immediately after cleaning to prevent water spots.