Demon Tweeks Power Steering Rack Boot Kit - Option 3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Demon Tweeks Universal Power Steering Rack Boot Kit (Option 3) is designed for car owners and mechanics seeking a durable and adaptable solution to replace worn or damaged power steering rack boots, especially those requiring a breather pipe. Its key benefit is a universal fit that can be trimmed for precision, offering a long-lasting seal against contaminants. A potential caveat is the need for accurate measurement to ensure the correct option is selected, as this specific variant is designed for rack diameters of 42-68mm and rod diameters of 8-52mm.
All features
| Model Part Number | DBSRPS300 |
|---|---|
| Brand | Demon Tweeks |
Extended Product Information
FAQs
What is the main purpose of a steering rack boot?
The steering rack boot protects the sensitive internal components of the power steering rack from dirt, moisture, and road debris, preventing premature wear and system failure.
How do I know if I need Option 3 of this kit?
You need Option 3 if your steering rack body diameter measures between 42mm and 68mm, and the inner rod diameter is between 8mm and 52mm. The boot's length also accommodates applications from 209mm to 253mm.
Can I install this kit myself?
Yes, the kit is designed for straightforward installation. The flexible material allows fitting without needing to remove the track rod end, which simplifies the process and helps maintain wheel alignment.
What does 'integral breather / balance pipe' mean?
This means the boot itself has a built-in pipe that allows for air pressure equalization within the steering rack. This is crucial for certain power steering systems to function correctly and prevent boot damage.
How long should this boot last?
Made from durable, stretchy material resistant to oil, grease, abrasion, and temperature extremes, this boot is designed for long-lasting performance. Lifespan will vary based on driving conditions and maintenance.
What should I do if the boot is slightly too long?
The boot is designed to be trimmed. Use a sharp, clean blade to carefully cut the excess length, ensuring a clean edge for a proper seal.
Troubleshooting
Boot does not fit securely
Ensure the correct option has been selected based on measurements. Re-apply tie wraps more firmly, ensuring they are fully tightened and locked. If trimming was done, ensure it was done evenly.
Boot appears too tight or too loose after installation
This may indicate the wrong size option was chosen or improper trimming. If slightly too long, trim with care. If significantly too short or too tight, a different option may be required. Ensure the fitting cone was used correctly during installation.
Breather pipe seems blocked
Gently clear any obstruction from the breather pipe using a soft brush or compressed air. Ensure it is not kinked.
Pros and Cons
Pros
- Adaptable universal fit for various vehicles
- Trimmable for a custom, precise fit
- Durable and resistant to common automotive fluids and wear
- Simplified installation process without track rod end removal
- Includes all necessary components for immediate installation
Cons
- Requires accurate measurement to select the correct option (this is Option 3)
- Trimming is necessary, which requires care for a perfect fit
- May require specialized tools for some users depending on vehicle access
Setup, Compatibility & Care
Compatibility:
This specific kit, Option 3, is designed to fit steering racks with a diameter between 42mm and 68mm, and rod diameters between 8mm and 52mm. The boot length is suitable for applications requiring 209mm to 253mm.
Setup and Installation:
- Measure: Confirm your steering rack and rod diameters fall within the specified ranges for Option 3.
- Prepare: Clean the area around the steering rack where the boot will be installed.
- Trim (if necessary): If the boot is slightly too long for your specific application, carefully trim it to the desired length using a sharp blade.
- Install Boot: Use the provided fitting cone to help stretch and slide the boot over the steering rack.
- Secure: Utilize the included tie wraps to firmly attach the boot to both the rack and the track rod ends, ensuring a tight seal.
- Connect Breather: Ensure the integral breather/balance pipe is unobstructed.
Care:
- Regularly inspect the boot for any signs of damage, cracks, or leaks.
- Keep the area around the boot clean. Remove any debris that could cause abrasion.
- If the boot becomes contaminated with oil or grease, clean it gently with a damp cloth and mild soap. Avoid harsh solvents.
- The durable material is designed for longevity, but replacement is recommended if significant wear or damage is observed.