Bar's Motor Oil Additive - 150g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Bar's Motor Oil Additive is a specialized chemical solution designed for vehicle owners dealing with minor engine oil leaks caused by aging or hardened gaskets. By rejuvenating seals and preventing internal contaminants, this product helps restore engine performance and quiet noisy operation; however, it is intended for maintenance and leak prevention rather than repairing catastrophic structural failures or cracked engine blocks.
All features
| Model Part Number | EUTRK |
|---|---|
| Brand | D2P |
Extended Product Information
FAQs
Can I use this with synthetic oil?
Yes, Bar's Motor Oil Additive is compatible with both conventional and synthetic motor oils.
How long does it take to work?
While some improvements can be seen quickly, it generally takes several days of regular driving for the additives to fully rejuvenate the seals.
Is this safe for all engine types?
It is designed for use in standard automotive internal combustion engines. Please consult your vehicle owner's manual if you have a highly specialized or performance engine.
Will this fix a blown head gasket?
No, this product is designed for minor leaks caused by aging gaskets and will not repair a blown head gasket or major structural damage.
Do I need to change my oil before using this?
It is not strictly required, but the product performs best when mixed with clean oil and a fresh oil filter.
Can I use more than one bottle?
Always follow the dosage instructions on the label. Adding more than recommended does not increase effectiveness and could disrupt oil viscosity.
Troubleshooting
Leak persists after 500 miles of driving
The seal may be too damaged for chemical restoration; a mechanical replacement of the gasket is recommended.
Engine oil is extremely dirty before adding
Perform an oil and filter change before adding the treatment to ensure maximum contact with the seals.
Pros and Cons
Pros
- Cost-effective alternative to expensive mechanical gasket replacements
- Easy to add during a standard oil change or top-off
- Multi-purpose formula prevents rust and sludge build-up
- Extends the service life of aging engine seals
Cons
- Will not fix major structural cracks or blown gaskets
- Requires time to circulate and soften rubber seals
- Not a permanent solution for severely degraded gaskets
Setup, Compatibility & Care
To apply the additive, ensure your engine is off and the oil level is within the recommended range. Remove the oil filler cap and pour the 150g container directly into the engine crankcase. Replace the cap securely. The product is compatible with most conventional and synthetic motor oils. For best results, allow the engine to idle for 10-15 minutes or take a short drive to ensure the additive is fully circulated. Monitor oil levels over the next 500 miles to determine if the leak rate has decreased significantly. Always store the bottle in a cool, dry place away from direct sunlight when not in use.