Bearing Fit Studlock Adhesive Sealant - Granville - 10ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users understand and effectively utilize Granville Bearing Fit & Studlock, a high-strength anaerobic thread-locking compound. It's ideal for professionals and DIY enthusiasts needing to secure and seal threaded fasteners and cylindrical parts. While incredibly strong and resistant to various environmental factors, remember that the compound cures in the absence of air, and proper application is key for optimal performance.
All features
| Model Part Number | 3114 |
|---|---|
| Brand | Granville |
Extended Product Information
FAQs
How long does it take for Granville Bearing Fit & Studlock to cure?
Fixture time is typically within 20 minutes, with full strength achieved within 24 hours at room temperature.
What is the shelf life of the product?
The shelf life is typically 12 months from the date of manufacture when stored properly.
Can I use this product on plastic?
It is not recommended for use on plastics unless compatibility is confirmed. The product is designed primarily for metal-to-metal applications.
Is it resistant to gasoline and oil?
Yes, Granville Bearing Fit & Studlock is highly resistant to gasoline, oil, and many other chemicals.
What temperature range can this product withstand?
The product can withstand a wide range of temperatures. Check the product specifications for exact temperature limits.
How do I remove the product if I need to disassemble the parts?
Use normal hand tools. Heat may be applied to stubborn fasteners to aid removal.
Do I need to clean the parts before applying the product?
Yes, it is essential to clean the parts thoroughly to remove any oil, grease, or rust for optimal performance.
Troubleshooting
Fastener won't tighten.
Ensure the product has been applied correctly and the threads are clean. Allow sufficient curing time.
Difficulty removing a fastener.
Apply localized heat to the fastener and use a suitable wrench or tool. Apply more force if necessary.
Poor adhesion.
Ensure surfaces were properly cleaned and prepared. Check the product's expiration date.
Leakage after application.
Ensure the application was sufficient and that all threads were fully coated. Tighten to the recommended torque.
Pros and Cons
Pros
- Provides a strong and permanent bond.
- Fast curing time for efficient use.
- Resistant to a wide range of chemicals and environmental conditions.
- Easy to remove with standard hand tools when required.
- Eliminates the need for welding or double nutting.
- Prevents corrosion and leakage.
Cons
- Requires the absence of air to cure, limiting its use in certain scenarios.
- May require surface preparation for optimal adhesion.
- Not suitable for all types of plastics or materials.
- Over-application can make disassembly more difficult.
- Requires proper storage to maintain its effectiveness.
- Not effective if the thread is already heavily corroded.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean and free of oil, grease, and rust for optimal adhesion. Use a suitable degreaser if needed.
- Application: Apply the product to the threads of the fastener or to the inside of the hole. Ensure even coverage.
- Assembly: Assemble the parts quickly after application, as the product begins to cure when air is excluded.
- Curing Time: Allow sufficient time for curing. Full strength is typically achieved within 24 hours at room temperature.
- Compatibility:
- Metals: Compatible with most metals.
- Not for: Use on plastics or rubber unless compatibility is confirmed.
- Care: Store in a cool, dry place. Avoid direct sunlight. Keep the container tightly closed when not in use.
- Removal: Use normal hand tools to remove. Heat may be applied to stubborn fasteners.