Lithofin Cement Veil Remover - 1 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Lithofin Cement Veil Remover to clean ceramic tiles, brick, and stone surfaces. The primary benefit is the effortless removal of cement residue, efflorescence, and other stubborn deposits. A key caveat: It's crucial to test the product on an inconspicuous area first, especially on natural stones, to ensure compatibility.
All features
| Model Part Number | 4001524001012 |
|---|---|
| Brand | lithofin |
Extended Product Information
FAQs
What surfaces can I use this product on?
Lithofin Cement Veil Remover is suitable for acid-resistant surfaces like ceramic tiles, brick, clay tiles, terracotta, concrete, and many natural stones.
What surfaces should I NOT use this product on?
Do not use it on polished and finely honed limestone and marble, as well as engineered stone.
How do I dilute the product?
Dilution instructions are on the product label and may vary depending on the type and severity of the soiling.
How much surface area will one litre cover?
Coverage is approximately 10 to 30 m² per litre, depending on the surface and the amount of residue.
What safety precautions should I take?
Always wear protective gloves and eye protection. Ensure adequate ventilation during use.
What should I do if the product discolors the surface?
Rinse the area immediately with plenty of water. This is more likely to occur on sensitive materials, so testing in an inconspicuous area is essential.
Can I use this product indoors?
While it can be used indoors, ensure good ventilation. For indoor use on ceramics, Lithofin KF Cement Residue Remover is recommended.
What if the product doesn't remove the stains?
Increase the concentration, allow a longer contact time, or gently scrub with a brush.
Troubleshooting
Surface discoloration after use.
Immediately rinse with plenty of water. This is more likely to occur on sensitive materials. Test in an inconspicuous area before full application.
Ineffective cleaning on stubborn stains.
Increase the concentration of the solution. Allow a longer contact time, or gently scrub the area with a brush.
Product not removing efflorescence.
Ensure that the product is applied directly to the affected area. Multiple applications may be necessary for severe cases.
Pros and Cons
Pros
- Efficiently removes stubborn cement and mortar residues.
- Suitable for a wide variety of acid-resistant surfaces.
- Concentrated formula offers good value and coverage.
- Almond-like odour for a more pleasant user experience.
- Specifically designed for use on construction sites.
Cons
- Not suitable for polished or finely honed limestone and marble.
- May cause yellow discoloration on iron-containing natural stones.
- Requires careful application to avoid damage to sensitive surfaces.
- Acidic content requires the use of protective equipment (gloves, eye protection).
- Best used outdoors or in well-ventilated areas.
Setup, Compatibility & Care
- Preparation: Always wear protective gloves and eye protection. Ensure adequate ventilation.
- Dilution: Dilute Lithofin Cement Veil Remover with water according to the instructions on the product label. The dilution ratio may vary depending on the severity of the residue.
- Application: Apply the diluted solution to the surface using a sponge, brush, or sprayer. Allow the solution to work for the recommended time (typically a few minutes). Do not let the solution dry on the surface.
- Rinsing: Rinse the treated area thoroughly with clean water. Multiple rinses may be needed.
- Compatibility: Suitable for acid-resistant surfaces such as ceramic tiles, brick, terracotta, and concrete. Avoid use on polished or finely honed limestone and marble.
- Care: Store in a cool, dry place, away from direct sunlight. Keep out of reach of children.