Bartoline All Purpose Wallpaper Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Bartoline All Purpose Wallpaper Adhesive is designed for DIY enthusiasts and professionals seeking a reliable, traditional flake-based solution for hanging all wallpaper types. Its primary benefit is providing excellent slip properties, which allow for precise positioning of paper sheets, though users must note that thorough surface preparation and proper mixing time are required to ensure a smooth, durable finish.
All features
| Colour | White |
|---|---|
| Model Part Number | FL3260 |
| Brand | Bartoline |
Extended Product Information
FAQs
Can this be used on paste-the-wall wallpaper?
Yes, this adhesive is suitable for paste-the-wall applications by applying the paste directly to the wall surface.
How long should I let the paste stand after mixing?
You should leave it to stand for 3 minutes after the initial 30-second stir to allow it to reach the correct consistency.
Is it suitable for embossed wallpapers?
Yes, but heavy or embossed papers should be soaked with the paste until they become supple before hanging.
What should I do if paste gets on the front of the paper?
Immediately wipe away any splashes with a clean, damp sponge to prevent permanent marks.
Does it work on absorbent surfaces?
Yes, but you must size the absorbent surfaces first and allow them to dry completely before you begin papering.
Troubleshooting
Lumps in the adhesive mixture
Ensure you sprinkle the flakes slowly into the water while stirring briskly rather than dumping them all at once.
Paper edges peeling away
Ensure you are applying the paste generously to the edges of the paper and allowing adequate soaking time for heavy papers.
Adhesive not setting properly
Verify that the surface was not damp or dusty before application, and ensure the surface was sized if it was highly absorbent.
Pros and Cons
Pros
- Excellent slip for accurate pattern matching
- Versatile for all wallpaper types
- Easy to prepare with cold water
- Reliable, traditional adhesive performance
Cons
- Requires manual mixing rather than pre-mixed convenience
- Preparation time needed for absorbent surfaces
- Requires careful cleaning if paste gets on the patterned side
Setup, Compatibility & Care
To ensure a successful application, follow these guidelines:
- Surface Preparation: Surfaces must be clean, dry, and dust-free. If there is a risk of mould, treat the area with a Fungicidal Wash. If the surface is highly absorbent, apply a size first and let it dry completely.
- Mixing: Use a clean bucket. Add the specified volume of cold water, sprinkle the adhesive flakes while stirring briskly for 30 seconds. Allow the mixture to stand for 3 minutes, then stir thoroughly again.
- Application: Apply paste generously to the edges of the paper. Avoid over-spreading.
- Storage: Keep unused paste in a sealed, airtight container if it needs to be stored for short periods, but it is best used immediately after mixing.