The Forgefix High Tensile Set Screw M8 x 30 is designed for professionals and DIY enthusiasts requiring strong, fully threaded fasteners for demanding applications. Its key advantage lies in its high tensile strength and full threading, ensuring secure and precise connections. Users should note that proper tools are essential for correct installation and to avoid damage.
High Tensile Strength: Manufactured from a high-grade steel, these screws are engineered to withstand significant pulling forces and stress, ideal for critical connections.
Fully Threaded Design: The entire shaft of the screw is threaded, providing maximum thread engagement, superior grip, and precise adjustment capabilities.
Zinc Plated Steel: Each screw is constructed from zinc-plated steel, offering enhanced corrosion resistance and durability in various environments.
M8 x 30 Dimensions: Specifically sized as M8 (8mm nominal diameter) with a length of 30mm, ensuring compatibility with standard M8 tapped holes and nuts.
Convenient 10-Pack: Supplied in a pack of ten, offering a practical quantity for small to medium-sized projects without excess.
Silver Finish: Features a silver finish, which is a result of the zinc plating, providing both a clean aesthetic and protective qualities.
Exceptional Strength: High tensile rating provides superior load-bearing capacity for demanding applications.
Maximum Thread Engagement: Fully threaded design ensures secure and consistent clamping force along the entire fastener length.
Corrosion Resistant: Zinc plating protects against rust and extends the lifespan of the screw in many environments.
Reliable Brand: Forgefix is a recognized brand for quality fasteners.
Versatile Application: Suitable for a wide range of structural, mechanical, and assembly tasks where strength is paramount.
Specific Sizing: The M8 x 30 size may not be suitable for all applications, requiring precise measurement and planning.
Tool Dependent: Requires the correct size wrench or socket for proper installation and removal (typically 13mm for M8 hex head).
No Integrated Washer: Users may need to supply separate washers for applications requiring larger bearing surfaces or vibration dampening.
Exceptional Strength: High tensile rating provides superior load-bearing capacity for demanding applications.
Maximum Thread Engagement: Fully threaded design ensures secure and consistent clamping force along the entire fastener length.
Corrosion Resistant: Zinc plating protects against rust and extends the lifespan of the screw in many environments.
Reliable Brand: Forgefix is a recognized brand for quality fasteners.
Versatile Application: Suitable for a wide range of structural, mechanical, and assembly tasks where strength is paramount.
Specific Sizing: The M8 x 30 size may not be suitable for all applications, requiring precise measurement and planning.
Tool Dependent: Requires the correct size wrench or socket for proper installation and removal (typically 13mm for M8 hex head).
No Integrated Washer: Users may need to supply separate washers for applications requiring larger bearing surfaces or vibration dampening.
The Forgefix High Tensile Set Screw M8 x 30 is engineered for robust fastening in situations where standard screws might not offer sufficient strength or thread engagement. Its high tensile properties make it ideal for critical structural connections where resistance to shear and tension forces is vital.
Common Applications:
Metal Fabrication: Joining metal plates, brackets, and structural components in workshops or on site.
Machinery Assembly: Securing parts in industrial machinery, engines, and heavy equipment where vibration and stress are present.
Automotive Repair: Fastening components in vehicles that require high strength and reliability.
Heavy-Duty Woodworking: Creating strong joints in large timber structures or furniture where significant load is expected (often with pre-drilled and tapped inserts).
Framework & Racking: Assembling shelving units, workbenches, and storage systems that need to support heavy loads.
Performance Benefits:
Thanks to its fully threaded design, these set screws provide maximum grip and precise adjustment. This is particularly beneficial in applications where fine tuning of component position is needed, or where the entire length of the screw needs to contribute to the joint's strength. The zinc plating ensures that the screws maintain their integrity and appearance even when exposed to moisture or corrosive agents, prolonging the life of your assembly.
Proper installation, compatibility, and care ensure optimal performance and longevity of your Forgefix High Tensile Set Screws.
Prepare the Hole: Ensure the mating component has a correctly sized M8 tapped hole. If using a nut, ensure it is an M8 metric nut.
Align Components: Position the parts to be joined accurately.
Insert the Screw: Carefully insert the M8 x 30 set screw into the aligned hole or nut.
Initial Engagement: Turn the screw by hand to ensure it engages the threads smoothly without cross-threading. If resistance is met early, back out and re-align.
Tighten: Using the appropriate wrench or socket (typically 13mm for an M8 hex head), tighten the screw. Apply steady, even pressure. Tighten to the recommended torque specification for your application to ensure a secure connection without over-stressing the fastener or material. Do not overtighten, as this can strip threads or damage the screw/material.
Compatible with any M8 internally threaded component (e.g., tapped holes, inserts) or M8 nuts.
Ensure the material thickness being joined does not exceed the screw's effective thread length for optimal performance.
Storage: Store unused screws in their original packaging or a dry, cool environment to prevent moisture exposure, even with zinc plating.
Inspection: Before each use, inspect screws for any signs of damage, such as bent shafts, stripped threads, or excessive corrosion. Do not use damaged fasteners.
Cleaning: If screws become dirty, wipe them clean with a dry or slightly damp cloth. Avoid harsh chemicals that could compromise the zinc plating.