Extended Product Information

The Nukeproof Neutron EVO (Electron EVO) Flat Pedals excel in delivering consistent, confident performance across various mountain biking conditions, especially for trail and Enduro riders. The updated pin layout combined with knurled traction patches ensures your feet stay firmly planted, reducing slips even on rough descents or through wet, muddy sections. This enhanced grip translates directly into improved control and stability. The nylon-reinforced composite body strikes an excellent balance between low weight and robustness, shrugging off impacts from rocks and roots without adding unnecessary bulk. The integrated sealed cartridge bearings and DU bushings provide a reliably smooth spin, minimizing maintenance needs and ensuring efficient power transfer. These pedals are built to endure, making them a practical choice for riders who push their limits on challenging trails, offering a solid connection point to the bike that enhances both confidence and performance. Their design is particularly suited for riders who prefer the freedom and maneuverability of flat pedals.

Setup, Compatibility & Care Instructions ### Setup 1. Identify Left and Right: Locate the 'L' and 'R' markings on the pedal axles. 'L' is for the left crank arm, 'R' for the right. 2. Lubricate Threads: Apply a thin layer of grease to the pedal threads to prevent seizing and aid smooth installation. 3. Install Pedals: Screw the 'R' pedal clockwise into the right crank arm. Screw the 'L' pedal counter-clockwise into the left crank arm. Remember: left pedal tightens counter-clockwise (reverse thread). 4. Tighten Securely: Use an appropriate pedal wrench (usually 15mm or an Allen key) to tighten the pedals firmly. Refer to your crankset manufacturer's recommendations for torque specifications. Overtightening can damage threads, while undertightening can cause pedals to loosen during riding. ### Compatibility - Crank Arms: These pedals are designed with a standard 9/16" axle thread, making them compatible with virtually all modern mountain bike and road bike cranksets. - Riding Style: Optimized for Mountain Biking, Trail, and Enduro disciplines, but suitable for any flat pedal riding. ### Care - Regular Cleaning: After muddy or dusty rides, clean the pedals with mild soap and water. Use a brush to remove debris from around the pins and body. Avoid high-pressure washers directly aimed at the bearing seals. - Inspect Pins: Periodically check the pedal pins for wear, damage, or looseness. If pins are worn down or missing, they can typically be replaced (spare pins may be sold separately). - Bearing Check: Every few months, spin the pedals by hand. If they feel gritty, rough, or have excessive play, the bearings may need servicing or replacement. This often involves specific tools and knowledge; consult a bike mechanic if unsure. - Axle Security: Occasionally check that the pedals are still securely tightened to the crank arms.