Shopping.co.uk

Splashback Bathroom Splashback - Charcoal Glass - Grey

Not AvailableSplashback Bathroom Splashback - Charcoal Glass - Grey
Not Available
Not Available
Not Available

There's no need for any tiling with this bathroom splashback. The self-adhesive backing lets you f...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Splashback bathroom splashback is designed for homeowners looking for a quick, grout-free alternative to traditional tiles behind sinks or vanity units. Its key benefit is the easy peel-and-stick installation and low maintenance cleaning. A potential caveat is that it requires a flat, smooth surface for proper adhesion.

All features

Model Part NumberSB50955
BrandSplashback

Extended Product Information

FAQs

What are the exact dimensions of the splashback?

The splashback measures 50cm in width and 25cm in height, with a thickness of 4mm.

Do I need any special tools to install it?

No special tools are required. Installation involves simply peeling the backing and sticking it to a clean, flat wall.

Can I install this over existing tiles?

This splashback is best installed on a flat, smooth wall. If your existing tiles are perfectly flat and smooth, it might be possible, but results can vary. A smooth painted surface is ideal.

What is the material of the splashback?

The splashback is made from 4mm toughened glass.

How do I clean the charcoal glass finish?

Clean with a soft cloth, warm water, and mild, soapy water. Avoid abrasive cleaners.

What is the warranty period for this product?

The splashback comes with a five-year manufacturer's guarantee.

Is this splashback heat resistant?

Yes, the toughened glass construction offers heat resistance, making it suitable for areas near sinks where minor heat may be present.

Where is this product manufactured?

This splashback is individually handmade in the UK.

Troubleshooting

Splashback not adhering properly

Ensure the wall surface was thoroughly cleaned, dried, and is perfectly flat before application. Reapply pressure, working from the center outwards. If issues persist, the surface may not be suitable.

Bubbles under the splashback

Carefully lift the edge of the splashback and reapply, smoothing out the air bubbles as you go. A small pinprick might release stubborn trapped air, but this should be done with caution.

Difficulty cutting or trimming the splashback

This splashback is not designed to be cut. It is recommended to measure the area carefully and choose the correct size to avoid the need for cutting.

Surface appears dull or smudged after cleaning

You may be using too much soap or an unsuitable cleaning agent. Stick to warm water and a minimal amount of mild, pH-neutral soap. Rinse thoroughly with clean water and buff dry with a soft microfibre cloth.

Pros and Cons

Pros

  • Extremely easy and fast to install, requiring no special tools or skills.
  • Provides a seamless, modern aesthetic without visible grout lines.
  • Durable and built to last with toughened glass construction.
  • Simple to clean, making bathroom maintenance effortless.
  • Aesthetically pleasing charcoal glass design complements various bathroom styles.

Cons

  • Requires a perfectly flat and smooth surface for optimal adhesion.
  • May not be suitable for very large wall areas due to its size and installation method.
  • Limited design options compared to traditional tile ranges.
  • Potential for difficulty in removal if repositioning is ever needed.

Setup, Compatibility & Care

Setup:

  1. Ensure the wall surface is clean, dry, and completely flat. Remove any dust, grease, or old adhesive.
  2. Carefully measure and plan the placement of the splashback.
  3. Peel off the self-adhesive backing from the splashback.
  4. Align the splashback with the desired position and press firmly from the center outwards to ensure full adhesion and remove air bubbles.
  5. Seal the edges if necessary, following specific sealant instructions (not included).

Compatibility:

This splashback is designed for direct application onto smooth, flat, and non-porous surfaces such as painted drywall, glass, or tile backsplashes. It is not recommended for textured, uneven, or damp walls. Ensure the area is suitable for a peel-and-stick application.

Care:

Clean the splashback regularly using a soft, damp cloth with warm, soapy water. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the glass surface or the adhesive backing. Rinse with clean water and dry with a soft cloth.