KCT White Picket Fence Garden Border - 5 Pack

The White Picket Fence Garden Border makes it easier to keep your garden neat and tidy and give a ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This KCT White Picket Fence Garden Border pack is designed for homeowners looking to easily define garden beds, borders, and lawn edges. Its key benefit is providing a neat, tidy, and visually appealing separation for your outdoor spaces. A caveat to consider is that it is unsuitable for installation in frozen or firm ground.

All features

BrandKCT

Extended Product Information

FAQs

What is the total length of fencing provided by one pack?

One pack contains 8 panels. Each panel is 59.5cm long. Therefore, one pack provides approximately 476 cm (4.76 meters) of continuous fencing.

Can I create a completely circular border?

Yes, the flexible nature of the panels allows you to create circular shapes. You may need to adjust the spacing of the panels and ensure they are securely interlocked and anchored to maintain the circular form.

How high will the fence be above the ground?

Each panel has a height of 32cm, with 21cm of that height being the portion that goes above the ground once installed.

Can these borders be used in winter?

The product is unsuitable for installation in frozen or firm ground. It is recommended to use them during warmer months when the ground is soft enough for installation.

How do I connect multiple packs together?

Each panel has an interlocking feature. You simply slide the edge of one panel into the corresponding groove of the next panel until they securely connect. This applies whether you are connecting panels within a pack or between different packs.

What is the best way to store the panels when not in use?

For best results and to maintain flexibility, store the panels at room temperature or above. This will ensure they are pliable and easy to install when needed.

Are the spikes on the fence panels removable?

The spikes are moulded as part of the panel design and are not removable. They are intended for direct insertion into the ground.

Troubleshooting

Panels are difficult to push into the ground.

Ensure the ground is adequately soft. Water the area gently or wait for wetter conditions. Avoid forcing the spikes, which could cause damage.

Panels do not interlock easily.

Check that the interlocking edges are clean and free from dirt or obstructions. Ensure you are aligning the correct edges of the panels. If the plastic is stiff (due to cold), bring the panels indoors to warm up for easier manipulation.

Borders are not holding their shape.

Verify that the spikes are inserted deeply enough into the ground. For curved or circular shapes, ensure a sufficient number of panels are used to maintain tension and stability. Consider adding extra spikes at key points if necessary.

Plastic appears brittle or cracked.

This may occur if the product has been exposed to extreme cold for extended periods. Allow the panels to return to room temperature before handling. If damage has occurred, contact customer support.

Pros and Cons

Pros

  • Creates a neat and defined garden appearance.
  • Easy to install and reposition.
  • Flexible design allows for custom shapes.
  • Interlocking panels provide scalability.
  • Offers a protective barrier for plant beds.
  • Visually enhances lawn edges.

Cons

  • Not suitable for frozen or hard ground.
  • Requires soft ground for effective installation.
  • Plastic construction may be less durable than wood in the long term.
  • Best results achieved when stored at room temperature or above before use to maximize flexibility.

Setup, Compatibility & Care

Setup:

  1. Ensure the ground is soft and free from large stones or debris. If the ground is firm, lightly water the area to soften it.
  2. Take an individual panel and align the spikes with the desired location in the ground.
  3. Gently push the spikes into the ground until the base of the fence panel rests on the soil surface.
  4. To connect additional panels, slide the interlocking edge of one panel into the corresponding groove of the next until they securely click together.

Compatibility:

  • Compatible with soft ground surfaces such as soil, grass, and garden beds.
  • Unsuitable for installation in frozen, very hard, or paved ground.

Care:

  • Clean the panels with a damp cloth as needed to remove dirt or debris.
  • Avoid using abrasive cleaners that could damage the plastic finish.
  • For optimal flexibility, store the panels at room temperature or above when not in use.