Johnstone's Trade Aqua Guard Gloss - Brilliant White - 1L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professional painters seeking a durable, water-based gloss finish for interior wood and metal. The key benefit is its innovative surface protection, offering excellent defence against wear, scratches, and marks while providing the high-quality finish of traditional solvent-based paints. A caveat to note is that it is water-based, which may affect application feel compared to solvent-based alternatives. This product offers advanced application, superior hiding power, and a non-yellowing formula with low VOCs.
All features
| Colour | White |
|---|---|
| Model Part Number | 473537 |
| Brand | Johnstone's Trade |
Extended Product Information
FAQs
Is this paint suitable for exterior use?
No, Johnstone's Trade Aqua Guard Gloss is specifically designed for interior wood and metal surfaces.
How long does it take to dry?
It is touch dry in 1-2 hours and ready for a second coat after 4-6 hours.
Can I use this on radiators?
While it is a durable gloss, it is not specifically formulated for the high heat of radiators. Check the product's technical data sheet for specific high-heat compatibility if required.
How do I clean my brushes after use?
Clean your brushes thoroughly with water immediately after painting.
What is the coverage rate?
The approximate coverage is 14 square meters per litre.
Will this paint yellow over time?
No, the formula is non-yellowing, designed to maintain its brilliant white appearance.
Can I spray this paint?
Yes, this paint is suitable for spray application. Ensure you follow manufacturer guidelines for spray equipment and thinning if necessary.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly prepared (cleaned, degreased, and lightly sanded if previously glossy). Check that a suitable primer was used on bare or problematic surfaces.
Uneven finish or brush marks visible
Apply thinner coats and use a high-quality brush or roller. Ensure paint is applied evenly and avoid overworking it. Allow adequate drying time between coats.
Paint is too thick or difficult to apply
Ensure the paint is thoroughly stirred. If necessary, a small amount of clean water (not exceeding 5% by volume) can be added to aid application, but avoid over-thinning.
Surface remains tacky after several hours
Check ambient temperature and humidity; drying times can be extended in cold or damp conditions. Ensure no contaminants were present on the surface during application.
Pros and Cons
Pros
- Offers robust protection against scratches and marks.
- Provides a high-quality gloss finish comparable to solvent-based paints.
- Low VOC content makes it a more environmentally friendly choice.
- Easy cleanup with water.
- Quick drying time speeds up project completion.
- Resists yellowing, maintaining a bright white appearance.
Cons
- May have a different application feel than traditional solvent-based gloss paints.
- Requires 4-6 hours recoating time, which may be longer than some fast-drying alternatives.
- Coverage is standard at 14 sqm/Litre and requires adequate preparation.
- Primarily intended for interior use, limiting exterior applications.
Setup, Compatibility & Care
Preparation:
- Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint.
- Lightly sand glossy surfaces to improve adhesion.
- For bare wood, apply a suitable primer. For previously painted surfaces, a primer or undercoat may be necessary depending on the condition and color.
Application:
- Apply with a brush, roller, or spray.
- Stir well before use.
- Apply 2 coats for optimal protection and finish.
- Allow 1-2 hours for touch drying and 4-6 hours before applying a second coat.
Compatibility:
- Suitable for interior wood and metal surfaces.
- Not recommended for exterior use.
Care and Cleaning:
- For best results, clean tools immediately after use with water.
- To clean painted surfaces, use a soft, damp cloth. Avoid abrasive cleaners which may damage the finish.