Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone using SILVER HOOK - BIG BOY's Big Boy Body Filler. It helps you understand how to use this lightweight, easy-sanding filler for a smooth finish on various surfaces. Keep in mind that while it's versatile, proper surface preparation is crucial for optimal results.
| Model Part Number | BIG07 |
|---|---|
| Brand | Silverhook Big Boy |
This filler is suitable for use on wood, metal, and rigid plastics.
Drying time depends on temperature and humidity, but it typically dries within a few hours.
Yes, it is corrosion-resistant and suitable for exterior use.
Start with a coarser grit (e.g., 80 grit) for shaping and move to a finer grit (e.g., 220 grit) for the final finish.
Clean the surface, remove any rust or loose paint, and sand the area to create a good surface for adhesion.
Follow the manufacturer's instructions for the correct mixing ratio. Mix thoroughly until the hardener is fully incorporated.
Yes, it is paintable with most automotive and household paints.
Ensure the correct amount of hardener is mixed with the filler. Check the expiration date.
Allow the filler to cure completely before sanding. Use appropriate sandpaper grit for the job.
Ensure the surface is properly prepared. Apply thin coats and avoid applying too much filler at once.
