WAGO 5-Pole T-Distribution Connector With Locking Clip - 770-620
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This WAGO 770-620 T-distribution connector is designed for electrical professionals and advanced DIYers needing a secure and efficient way to connect flying leads in a T-junction configuration. Its primary benefit is the robust, tool-free connection with integrated locking levers and a specialized clip system for enhanced stability, ensuring safe and reliable electrical distribution. A key consideration is its IP20 rating, meaning it's suitable for indoor dry environments and requires protection from moisture and dust. This 5-pole connector facilitates easy 1-input, 2-output branching, featuring 100% protection against mismating.
All features
| Model Part Number | 770-620 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the maximum current and voltage rating for this connector?
The WAGO 770-620 has a rated voltage of 400 V and a rated current of 25 A.
Can this connector be used outdoors?
No, this connector has an IP20 rating, which means it is only suitable for dry, indoor environments and is not protected against water ingress.
How do I know if the wires are connected correctly?
The locking levers should snap shut securely, indicating a proper connection. You should feel resistance when pulling on the wire, and it should not come loose. The connector also features 100% protection against mismating.
What type of wires can be used with this connector?
This connector is designed for flying leads and is compatible with solid and stranded conductors within specified sizes. Refer to the technical datasheet for precise conductor gauge compatibility.
Is this connector halogen-free?
Yes, the WAGO 770-620 connector is made from halogen-free Polyamide (PA) housing material.
What does the blue color coding signify?
The blue color helps in easy identification and often signifies specific voltage ranges or application types, aiding in compliance with electrical standards.
How do I disconnect a wire from this connector?
To disconnect, simply open the integrated locking levers on the port where the wire is inserted. This will release the tension on the conductor, allowing it to be pulled out.
Troubleshooting
Connector not making a secure connection.
Ensure the wire ends are stripped to the correct length and that they are fully inserted into the port. Verify that the locking levers are completely closed and latched.
Intermittent power or connection failure.
Check that all wires are properly seated and secured by the locking levers. Inspect wires for damage and ensure they meet the conductor size specifications for the connector. Confirm the connector is within a dry environment and not exposed to moisture.
Difficulty closing the locking levers.
Ensure no debris is obstructing the lever mechanism. Check that the wire is fully inserted; sometimes, improper insertion can interfere with lever closure. If issues persist, inspect the wire termination for imperfections.
Pros and Cons
Pros
- Offers secure and reliable T-distribution connections for flying leads.
- Tool-free installation significantly speeds up wiring tasks.
- Integrated locking levers and specialized clip system ensure high connection stability.
- Color-coded for easy identification and compliance.
- Designed with safety features like 100% protection against mismating.
- Durable Polyamide housing and tinned copper contacts for longevity.
Cons
- IP20 rating limits use to dry indoor environments only.
- Not suitable for applications requiring higher ingress protection (e.g., outdoor or wet locations).
- Requires specific flying lead cable types for optimal connection.
- May require careful handling to engage locking levers correctly on initial use.
Setup, Compatibility & Care
Setup:
- Strip the flying leads to the appropriate length as recommended by WAGO standards (refer to product documentation for exact stripping length).
- Open the locking levers on the input and output ports.
- Insert the stripped ends of the flying leads into the respective ports until they are fully seated.
- Close the locking levers firmly to secure the connections. Ensure all levers are fully closed.
Compatibility:
- Designed for use with solid and stranded conductors within the specified gauge range (refer to technical datasheet for precise conductor sizes).
- Compatible with flying lead connections.
- Suitable for use within distribution boards, junction boxes, and control cabinets.
Care:
- This connector has an IP20 rating, meaning it is protected against solid objects greater than 12.5 mm but offers no protection against water. Therefore, it must be installed in a dry environment.
- Keep the connector and its connection points clean and free from dust or debris. Use a dry, lint-free cloth for cleaning if necessary. Avoid using solvents or abrasive cleaners.